Installing The Multi Direct Print Application - Ricoh AP204 Operator's Manual

Reply from 192.168.15.16 : bytes=32 time<10ms TTL=32
If the address has been configured incorrectly, the following message ap-
pears.
Request timed out.
Configuring a Windows 95/98 computer
Follow these steps to configure a Windows 95/98 to use the TCP/IP protocol.
A
Double-click the [Network] icon of [Control Panel], and confirm that "TCP/IP"
is in the [The following network components are installed] box of [Configuration]
tab.
Note
If TCP/IP is not installed, click [Add] of [Configuration] tab, and install it. For
more information, refer to the Windows 95/98 online help.
B
Configure the TCP/IP protocols with the appropriate IP address, subnet
mask and other settings.
Confirm with the network administrator that the settings are correct.

Installing the Multi Direct Print Application

Follow these instructions to install Multi Direct Print.
Preparation
You must restart the computer after installing Multi Direct Print. Be sure to
close all applications before beginning the installation process.
Note
You must install Multi Direct Print and the appropriate printer driver in order
to print. To be able to browse the printer via the network, PRINTER MAN-
AGER FOR CLIENT needs to be installed.
A
Insert the CD-ROM that comes with the printer into your computer's CD-
ROM drive.
B
Open [Control Panel], and double click the [Add/Remove Programs] icon.
C
In the [Install/Uninstall] tab, click [Install].
D
Click [Next >].
E
Input the name of the CD-ROM drive in the [Command line for installation pro-
gram] box, followed by ":\NETWORK\MDP\SETUP" (do not include the
quotation marks), and then click [Finish].
Configuring Windows 95/98
1
9