Dump; Log - Toshiba BA400 Series Key Operation Specification

9.6 DUMP

A dump list of the received data of each interface can be printed or saved to a USB memory. However,
when an RFID write error occurs, the dump list printing function cannot be used.
USB
USB MEMORY
PRINT
ON DEMAND
ALL
LAN/WLAN
Subsequent menus are the same as USB.
BLUETOOTH
Subsequent menus are the same as USB.
RS-232C
Subsequent menus are the same as USB.
CENTRONICS
Subsequent menus are the same as USB.
RFID
Subsequent menus are the same as USB.
BASIC1
Subsequent menus are the same as USB.
BASIC2
Subsequent menus are the same as USB.

9.7 LOG

Log data can be saved to USB memory.
PRINTER TO USB
ROM/RAM
LOG
* Log data supported in the initial version is printer memory information (ROM, RAM). Note that the
memory information at that time is saved in the USB memory, so the memory contents will change when
the power is turned off. In particular, note that the memory contents of RAM will be lost.
* Log data is printer memory information (ROM, RAM) and sensor log acquisition function.
* While the log is being written, the LCD display shows "WRITING...", the online LED blinks, and the
error LED turns off.
: Save to USB memory
: Print on label
: Print a certain amount
: Print all at once
CANCEL
OK
Subsequent menus are the same as ROM/RAM.
141