Toshiba BA400 Series Key Operation Specification page 63

[Description] Country Code Setting
[Values to be printed]
INIT，USA，CAN，MEX，BRA，CHL，JPN，AUS，NZL，ZAF，CHN，
HKG，TWN，KOR，BEL，NLD，LUX，FRA，ITA，DEU，DNK，
IRL，GBR，GRC，ESP，PRT，AUT，FIN，SWE，CZE，EST，
CYP，LAT，LTU，HUN，MLT，POL，SVN，SVK，BGR，ROM，
NOT，LIE，ISL，CHE，IDN，ARG，ARE，MYS，PHL，VNM，
COL，THA，TUR，SGP，RUS，IND
AP MODE CHANNEL [ ]
[Description] Channel setting of AP Mode
[Values to be printed]
1 ch， 2 ch， 3 ch， 4 ch， 5 ch， 6 ch， 7 ch， 8 ch， 9 ch，10 ch，
11 ch，12 ch，13 ch，14 ch，36 ch，40 ch，44 ch，48 ch，52 ch，56 ch，
60 ch，64 ch，100 ch，104 ch，112 ch，116 ch，120 ch，124 ch，128 ch，
132 ch，136 ch，140 ch，149 ch，153 ch，157 ch，161 ch，165 ch
<< BLUETOOTH >>
BLUETOOTH [ ]
[Description] Bluetooth setting
[Values to be printed]
ON
OFF
DEVICE NICKNAME [ ]
[Description] Bluetooth device nickname setting
[Values to be printed]
Max 32 characters
BD ADDRESS [ ]
[Description] BD address
[Values to be printed]
XX:XX:XX:XX:XX:XX
FACTORY TEST [ ]
[Description] Distinction for Device Nickname
[Values to be printed]
OFF
ON
INQUIRY [ ]
[Description] Inquiry setting.
[Values to be printed]
OFF
EVERY
60 sec
SECURITY [ ]
[Description] Bluetooth Security setting
[Values to be printed]
：
SSP
：Link level security
LINK
OFF : No security feature
Note: This parameter is set by using the Printer Setting Tool.
Note: This parameter is set by using the Printer Setting Tool.
：Bluetooth ON
：Bluetooth OFF
Device nickname for assembly process test is not used.
Device nickname for assembly process test is used.
Inquiry is disabled.
Inquiry is enabled.
Inquiry is enabled only for 60 sec. after the start of the printer.
Secure simple pairing
58