Toshiba BA400 Series Key Operation Specification page 56

rsv7: (Reserved7):
[Note] This item is reflected when the printer is turned OFF / ON.
ENERGY TYPE (D) [ ]
[Description] Energy level applied to the print head in thermal direct mode
[Values to be printed]
NORM:
HIGH: :
LOW::
SA1 SA Type1:
SA2 SA Type2:
rsv3: (Reserved3):
rsv4: (Reserved4):
rsv5: (Reserved5):
rsv6: (Reserved6):
rsv7: (Reserved7):
[Note] This item is reflected when the printer is turned OFF / ON.
POWER SAVE TIME [ ]
[Description] Length of time until the printer enters sleep mode
[Values to be printed]
1 min. to 240 min.
RIBBON TORQUE [ ]
[Description] Ribbon take-up torque
[Values to be printed]
Normal: Standard
Low: Low
[Note] This item is reflected when the printer is turned OFF / ON.
BASIC [ ]
[Description] Basic interpreter setting
[Values to be printed]
OFF: Basic interpreter is disabled.
ON: Basic interpreter is enabled.
BASIC TRACE [ ]
[Description] Basic interpreter trace setting
[Values to be printed]
OFF: Trace is disabled.
ON: Trace is enabled.
CUT MODE[]
[Description] Setting CUT mode
[Values to be printed]
TYPE1: Standard cut mode(High speed cut).
TYPE2: Compatible cut mode(Same speed as B-SA).
MULTI LABEL[]
[Description] Setting Multi label
[Values to be printed]
OFF: Disable
TYPE2: Enable
FEED LENGTH[]
[Description] Label mileage warning setting
[Values to be printed]
1 km to 3200 km
TOTAL LENGTH []
[Description] Total label mileage warning setting
[Values to be printed]
Reserved
General-purpose
High
Low
SA Type1
SA Type2
Reserved
Reserved
Reserved
Reserved
Reserved
51