Toshiba BA400 Series Key Operation Specification page 60

EVEN: Even
ODD: Odd
CONTROL [ ]
[Description] Transmission control method
[Values to be printed]
XON+READY AUTO:
XON/XOFF AUTO:
READY/BUSY RTS:
XON/XOFF:
READY/BUSY:
<< CENTRO >>
ACK/BUSY [ ]
[Description] Centronics ACK/BUSY timing
[Values to be printed]
Rising edge:
Trailing edge:
INPUT PRIME [ ]
[Description] Reset process when the nInit signal is ON
[Values to be printed]
OFF: Reset is not performed.
ON: Reset is performed.
PLUG & PLAY [ ]
[Description] Plug-and-play operation
[Values to be printed]
OFF: Plug-and-play is disabled.
ON: Plug-and-play is enabled.
<< LAN/WLAN >>
LAN/WLAN [ ]
[Description] LAN type
[Values to be printed]
OFF: Disabled.
AUTO: Automatically selected.(If WLAN is installed, LAN is not available.)
LAN: Wired LAN
WLAN: Wireless LAN
SNMP [ ]
[Description] Whether to enable SNMP
[Values to be printed]
OFF: Disabled.
ON: Enabled.
IP ADDRESS [ ]
[Description] Printer IP address
XON/XOFF+ READY/BUSY(DTR) mode
(XON output when the power is on, XOFF output when the power is off)
XON/XOFF mode
(XON output when the power is on, XOFF output when the power is off)
RTS mode
(No XON output when the power is on, no XOFF output when the power is off)
XON/XOFF mode
(No XON output when the power is on, no XOFF output when the power is off)
READY/BUSY(DTR)
(No XON output when the power is on, no XOFF output when the power is off)
A rise of ACK signal and a release of BUSY occur at the same time.
A fall of ACK signal and a release of BUSY occur at the same time.
55