Auto Print (Trans.); Auto Print (Refl.) - Toshiba BA400 Series Key Operation Specification

8.6.8

AUTO PRINT (TRANS.)

The factory test print is performed on the following conditions, therefore, the parameter settings and the print
density fine adjustment value are ignored.
Key functions after printing of each test pattern are as follows.
[PAUSE] key (or its substitute key):
<Factory test print patterns and print conditions>
Print test pattern
Issue count
Print speed
Sensor type
Print method
Issue mode
Label pitch
Print density fine adjustment value
8.6.9

AUTO PRINT (REFL.)

The factory test print is performed on the following conditions. therefore, the parameter settings and the print
density fine adjustment value are ignored.
Key functions after printing of each test pattern are as follows.
[PAUSE] key (or its substitute key):
<Factory test print patterns and print conditions>
Print test pattern
Issue count
Print speed
Sensor type
Print method
Issue mode
Label pitch
Print density fine adjustment value
Next printing is performed.
1 blank label
3-dot slant lines
Barcode
Characters
5 labels each
203 dpi 4 ips
300 dpi 4 ips
Transmissive sensor
Thermal transfer
Batch issue
76 mm
±0
Next printing is performed.
1 blank label
3-dot slant lines
Barcode
Characters
5 labels each
203 dpi 4 ips
300 dpi 4 ips
Reflective sensor
Thermal transfer
Batch issue
76 mm
±0
98