Advertisement
6)
DRIVE SHAFT
(1)
General standards
1
Sun gear
2
Plenatary gear
3
Internal gear
4
Internal gear carrier
5
Taper roller bearing
OPERATION
Drive axle which consists of differential carrier assembly (9), drive shaft (8) and hub assembly (6)
transmits the drive force from transmission to the wheels.
Pinion shaft (11) is connected to transmission output through universal joint.
The power of transmission is transmitted to differential which consists of pinion shaft (11) and ring
gear (10) and the differential rotates the drive shaft (8).
Side gear (14) and drive shaft (8) are connected with spline and the drive shaft (8) connect to
planetary gear (2), inner hub (6) and finally drive wheels.
6
Hub assembly
7
Disc brake
8
Drive shaft
9
Differential carrier
10 Ring gear
3-48
11 Pinion shaft
12 Spider
13 Pinion gear
14 Side gear
110DEDA03
Advertisement
