Advertisement
Mount the pressure regulators(1) and
fasten them by means of fixing plates
and cap screws.
Install the fixing plate with the neck
showing downwards
Observe radial installation position of the
pressure regulators.
Tightening torque - - - - - - - - - - - - - M
Assemble the wiring harness(1) and
connect the pressure regulators(6x).
Installation position of pressure regula-
tors.
Pay attention to the installation position of
the wiring harness, also see markings
page 3-69.
Put on the plate gasket(1).
Assemble the plug socket with the slot
showing to the lug of the cover until
contact.
Fasten the cover by means of cap
screws.
Tightening torque - - - - - - - - - - - - - M
(S)Torque spanner
(S)Socket spanner TX-27 5873 042 002
Fix the wiring harness by means of
retaining clamp(1).
Install the opposite cover
=0.56kg m
A
=0.56kg m
A
5870 203 031
3-118
1
D507TM224
1
D507TM225
1
D507TM226
1
D507TM227
Advertisement
