Advertisement
Mount the clutch(1) until contact is
obtained.
Wear safety gloves.
Press the taper roller bearing(inner
ring)(1) until contact is obtained.
Install the piston ring(1).
Install the stud(1).
Tightening torque - - - - - - - - - - - - - - M
Check closing respective opening of the
clutch by means of compressed air at the
bore(2).
Closing respective opening of the clutch
must be clearly audible.
=1.7kg m
A
3-89
1
2
1
D507TM108
D507TM109
1
D507TM110
1
D507TM111
Advertisement
