Advertisement
6)
WORK LAMP SWITCH
160D7CD46
7)
REAR WIPER AND WASHER SWITCH
160D7CD47
8)
AUTO/MANUAL CHANGEOVER SWITCH
1
2
3
160D7CD49
9)
INC/DEC SWITCH
OFF
ON
160D7CD50
10)
SEAT HEAT SWITCH
160D7ECD57
(1)
This switch is used to operate the front and rear work lamps by two
steps.
·First step
: Front work lamp comes ON.
·Second step : Rear work lamp comes ON.
(1)
This switch is used to operate the rear wiper and washer by two
steps.
·First step
: The rear wiper operates.
·Second step : The washer liquid is sprayed and the rear wiper is
operated only while pressing. If release the switch,
return to the first step position.
①
(1)
Manual
mode(①
)
Press the top of the switch for the manual mode of the autoshift
function. The operator selects the desired speed and the desired
direction in the manual mode with the gear selector lever.
(2)
Automatic 1st mode(②)
Place the switch in the middle position for the autoshift function
changing from 1st to 3rd gear shift mode.
(3)
Automatic 2nd mode(③
Press the bottom of the switch fully for the autoshift function
changing from 2nd to 3rd gear shift mode.
(1)
When engine running, the low rpm of engine increase or decrease
by 25rpm by operating this switch.
Engine low rpm returns to normal value when engine restarted.
(1)
This switch is used to heat the seat.
7-33
③
)
Advertisement
