Advertisement
Take off the fulcrum and mounting flange
very carefully keeping all components in
their own positions.
Take out the spool, return spring from the
body. And replace any component if it is
needed.
Reassemble the spool in opposite order
mentioned above.
Insert spool as straight as possible not to
give any damaged on it while inserting it
into body.
Prepare copper cap in clean.
Apply some clean grease around the O-
ring on the copper cap, in order to avoid
any damage of O-ring while fitting it into
body.
6-61
100D7RCV06
100D7RCV07
100D7RCV08
100D7RCV09
Advertisement
