Advertisement
(5)
Transmission and axle cooling piping
Disconnect cooling hose and connector
from the transmission.
Make sure that the coolant has been
drained from the line.
Disconnect axle cooling hose and
connector from the axle.
Make sure that the axle cooling oil has
been drained from the line.
(6)
Flexible plate
Remove the cover on the top face of the
torque converter housing then remove
the 8 mounting bolts installed to the
engine flywheel.
To rotate the flywheel, remove 1
mounting bolt, then insert a turning tool in
the mounting hole. One man must turn
the engine fan by hand while the other
turns the flywheel.
(7)
Mounting bolts holding to flywheel
housing
Remove the transmission assembly from
the torque converter housing by loosen-
ing the mounting bolts and socket bolts.
Transmission
assembly
Axle
cooling
oil tank
Cooling hose
Drive
axle
Cover
Transmission
Bolt
Transmission
2-10
Radiator
assembly
Cooling
hose
110DERE10
Radiator
assy
OUT
Pump
IN
110DERE22
Engine
Flexible plate
Bolt
110DERE11
Engine
Socket bolt
110DERE12
Advertisement
