(3)
Check and record the rotational torque
measurements of the carrier assy and then
disassemble cotter pin (6).
Disassemble two nuts (8) and two differential
caps (9), after untightening four bolts (7).
Check and record the direction of the cap
before removing bearing cup.
(4)
Disassembly ring gear assy (10) from carrier
assembly.
(5)
Disassemble both of two tapered roller
bearings (11).
Loosen twelve bolt (12), then disassemble
ring gear.
(7)
(12)
3-130
(8)
(6)
(10)
(11)
110DEDA38
(9)
110DEDA39
110DEDA40
110DEDA41