Advertisement
4)
ASSEMBLE CARRIER TO AXLE HOUSING
(1)
Assemble the carrier assy into axle
housing.
(2)
Fix the carrier assy to axle housing with
the hex bolt.
Tightening torque : 28.0~32.0kgf cm.
(3)
Assemble brake disc to yoke (1) with hex
bolt.
Apply loctite #271 or #277 on the thread
of the bolt and tighten them.
Tightening torque : 16.0~20.0kgf cm
(4)
Fix the parking brake support (3) with
socket bolt and assemble parking brake
(4).
5)
ASSEMBLE THE BRAKE AND HUB
(1)
Assemble bearing (1) and O-ring (2) into
wheel hub.
Confirm that the bearing and O-ring
contact to wheel hub.
Apply loctite #5271 on the contact surface
of the spline hub assy and assemble it.
Apply grease on the bearing and O-ring
and then assemble them.
Check the statue of the oil seal (3) in the
hub and assemble the spline hub.
(1)
3-140
110DEDA64
110DEDA65
(2)
110DEDA66
(3)
110DEDA67
Advertisement
