Advertisement
(2)
Mounting of the filter(pressure filter)
Fasten the filter head(1) with new O-rings
by means of cap screws(2) to the trans-
mission housing.
Tightening torque(M8) - - - - - - - M
(S)Torque spanner
(S)Socket spanner TX-40 5870 042 004
The filter is to be installed as follows:
- Oil the gasket slightly
- Turn in the filter until contact with the
sealing surface is obtained and then ti-
ghten it by hand with an approx. 1/3 to
1/2 rotation.
Prior to initial operation of the transmiss-
ion make the oil filling in accordance with
the operating instructions.
=2.4kg m
A
5870 203 034
3-121
1
2
1
D507TM236
D507TM237
Advertisement
