Advertisement
(3) (3)
Head light pilot lamp
Head light pilot lamp
160D7CD07
(4) (4)
Preheater pilot lamp
Preheater pilot lamp
77073CD14
(5) (5)
Inching pilot lamp
Inching pilot lamp
77073CD65
(6) (6)
Fuel heater pilot lamp
Fuel heater pilot lamp
21093CD43
①
This lamp comes ON when the main light switch is operated to
2nd step.
①
This lamp lights ON when start switch is turned clockwise to the
ON position. Light will turn off after approximately 15~45
seconds, depending on engine temperature, indicating that
preheating is completed.
②
When the lamp goes out the operator should start cranking the
engine.
※
Refer to the operator's manual page 5-12.
Refer to the operator's manual page 5-12.
①
When the inching switch is pressed, the lamp lights ON.
①
This lamp is turned ON when the coolant temperature is below
10°C (50°F) or the hydraulic oil temperature 20°C ( 68°F).
②
The automatic fuel warming is cancelled when the engine
coolant temperature is above 60°C, or the hydraulic oil
temperature is above 45°C since the start switch was ON
position.
7-21
Advertisement
