Revision History - ST STM32L476ZG User Manual

UM1855
10

Revision history

Date
22-Jul-2015
29-Jul-2015
09-Sep-2015
07-Jul-2016
20-Nov-2016
12-Jun-2023
Table 51. Document revision history
Revision
1 Initial Version
Added Section 6.6.2: Bootloader
2
Classification change from ST Restricted to Public.
Figure 3: swap of FAULT and VBUS prints in the upper-left
corner of the board.
Section 6.8.3: swap of LD5 and LD6.
9: modified
Table 16: JP6 default setting modified.
Section 6.5
3
Table 34: JP11 default setting modified and position
information added.
Table 11: JP19 default setting modified.
Table 45: CN2 instead of CN1
Section 7.2: CN2 corrected in CN22
Multiple language or typographical corrections.
Updated Table 36: LCD daughterboard connectors (CN11 and
4
CN14).
Updated Introduction, Features,
and configuration,
IrDA transceiver is no more supported since board revision C-
5
02.
Updated board schematics in
diagrams.
Document reshuffled to align with the latest standards, from
Introduction
6
Added STM32L476G-EVAL board information
Removed Schematic diagrams
UM1855 Rev 6
Changes
limitations.
Section 9.1.3 and Section 9.2
and Section 6.9.1: JP9 by-default setting added.
Section 2: Hardware layout
Section 2.9: RS-232 and IrDA
Section Appendix A: Schematic
to Unpacking recommendations
Revision history
text.
ports, since
79/80
79