24
5. If necessary, use trackpad up/down to highlight, in turn, the SIMU-
6. Press CLEAR twice to return to the chart screen.
7. A flashing SIM indicator appears at the top left of the chart screen.
3.4 Controlling the Display
This section describes how to:
•
•
Selecting the Display Mode
Use the PAGE key to select the display mode. Select the following modes
by repeat presses of the PAGE key as listed below and as shown overleaf:
•
•
•
•
•
•
•
Note: The setup function bar is displayed when first entering a screen,
press CLEAR to hide this bar.
Note: Press GOTO to return to normal Chart display at any time
LATED SOG and COG options and trackpad left/right to set as desired.
Speed is set in 1Kt intervals and Course in 1° intervals.
Change the display mode
Move around the chart by panning the display, changing the chart
center and changing the chart scale
Set Up functions (see Chapter 4)
Course Deviation Indicator (CDI)
Bearing & Distance Indication (BDI)
Waypoint data
Navigation data
Time/Date data
Return to Chart Display
RC435 and RC435i Chartplotters