Go To Cursor - Raymarine 435i Owner's Handbook Manual

70
Figure 5-4: Waypoint List
2. Select GOTO WAYPOINT.

Go to Cursor

Note: If navigation is currently in progress or if the cursor is homed
(Find Ship) it is not possible to go to cursor.
➤
To navigate directly to the current cursor position:
1. Press the GOTO key and select GOTO CURSOR. The GOTO CURSOR
2. Use the trackpad to position the cursor as desired.
3. Press ENTER to start the GOTO, or CLEAR to cancel the operation.
A waypoint also can be selected from the Waypoint List as described
in Working with Waypoints on page 47.
A dotted line is drawn from the vessel's current position to the
selected waypoint and navigation to the selected waypoint begins.
function now has help text appended to it:
RC435 and RC435i Chartplotters
D4991-3
D4691_1