62
Figure 5-3: Route Info
The route is displayed as a series of legs. For each leg the next waypoint
position, leg bearing, leg distance, total distance and elapsed time at
current Speed over Ground (SOG) is listed. Press the trackpad up/down
keys to scroll through the list.
3. To display the ETA at each route waypoint select TIME ETA and press
4. To enter a planned SOG (rather than actual SOG) select PLANNED
5. To recalculate using actual SOG, select ACTUAL SOG and press
6. Press CLEAR four times to return to chart mode.
ENTER.
SOG. and press ENTER.
Use the trackpad left/right keys to change the planned SOG value
and press ENTER to recalculate route with this value.
ENTER.
RC435 and RC435i Chartplotters
D6238-2