Using Archives; Archiving A Route - Raymarine 435i Owner's Handbook Manual

86

5.9 Using Archives

The ARCHIVE function is used to save routes, tracks and waypoints to the
Gold Chart card. This is particularly useful if you use a lot of routes,
tracks or waypoints and do not wish to repeatedly re-enter these. Once
you have archived your data to the card, the copy on the chartplotter can
be deleted, thus freeing up memory.
Note: A typical 32Mb Gold Chart card will hold up to 500 waypoints or
20 routes, each with up to 50 waypoints. If the Gold Chart card also con-
tains chart files then these values will be lower.

Archiving a Route

➤
To archive a route:
1. In chart mode, press ENTER; the primary function bar is displayed:
2. Using trackpad left/right, select ARCHIVES.
3. Select ARCHIVE ROUTE. A list of routes currently loaded in the chart-
plotter is displayed. Use trackpad up/down to select the route you
wish to archive and press ENTER. To leave without archiving, press
CLEAR.
RC435 and RC435i Chartplotters
D6233-1
D6254-1