Clearing The Current Track; Smartroute - Raymarine 435i Owner's Handbook Manual

84
2. Use trackpad left/right to select TRACK ENABLE and press ENTER.
The vessel's track is displayed on-screen with a line joining the points at
the selected interval.

Clearing the Current Track

The current track can be cleared from the screen.
➤
To clear the current track:
1. Select CLEAR TRACK.
2. If no further track points are to be placed, select TRACK OFF and press

SmartRoute

SmartRoute enables the latest track to be converted to a route.
➤
To convert a track to a route:
1. Select MAKE INTO ROUTE and press ENTER.
2. Check the calculated route and that the route deviation from the orig-
The TRACK ENABLE text changes to indicate TRACK OFF.
The current track is cleared from the screen and memory.
ENTER; the TRACK OFF text changes to indicate TRACK ENABLE.
The current track is converted to a new route, with the most recently
placed track point as the start of the route. In other words, the track is
reversed.
If there is an unsaved current route on screen, the option to save the
route is given, see Section 5.3, Working with Routes.
inal, given in the warning box, is within navigable limits.
RC435 and RC435i Chartplotters