Raymarine 530 Owner's Handbook Manual
  1. Manuals
  2. Brands
  3. Raymarine Manuals
  4. GPS
  5. 530
  6. Owner's handbook manual

Raymarine 530 Owner's Handbook Manual

Raymarine chartplotter display owner's handbook sl520, 530, 631 plus
Hide thumbs
Table of Contents

Advertisement

Quick Links

Enlarged version
SL520/530/631 PLUS
Chartplotter
Display
Owner's
Handbook
Document number: 81209_1
Date: September 2002

Advertisement

Table of Contents
loading

Related Manuals for Raymarine 530

Summary of Contents for Raymarine 530

  • Page 1 SL520/530/631 PLUS Chartplotter Display Owner’s Handbook Document number: 81209_1 Date: September 2002...
  • Page 3 SL520/530/631 PLUS Chartplotter Display Owner’s Handbook September 2002 INTENDED USE The display units detailed in this handbook may form part of navigational radar systems intended for light marine use. These displays and radar systems are only an aid to navigation.
  • Page 4 Raymarine products are supported by a network of Authorized Service Representatives. For information on our products and services, contact either of the following: UNITED STATES Raymarine Inc. 22 Cotton Road, Unit D Nashua, NH 03063-4219 Telephone: +1 603 881 5200...

  • Page 5: Preface

    In order to obtain the best results in operation and performance, please read this handbook thoroughly. Raymarine’s Technical Services representatives or your local dealer will be available to answer any questions you may have. TFT Color LCD Displays The colors of the display may seem to vary when viewed against a colored background or in colored light.

  • Page 6: Emc Conformance

    SL520/530/631 PLUS Chartplotter Displays EMC Conformance All Raymarine equipment and accessories are designed to the best industry standards for use in the recreational marine environment. The design and manufacture of Raymarine equipment and accessories conform to the appropriate Electromagnetic Compatibility (EMC) standards, but correct installation is required to ensure that performance is not compromised.

  • Page 7: Table Of Contents

    Contents Preface ... 1.v Warranty ... 1.v EMC Conformance ... 1.vi Chapter 1: Overview ...1.1 How to Use This Handbook ... 1.1 1.1 General ... 1.3 PLUS Display Units ... 1.3 Operating Modes ... 1.4 Heading and Position Data ... 1.4 1.2 The Chartplotter Display ...
  • Page 8 Make and Follow a Route ... 2.20 Review Your Passage Plan ... 2.22 Chapter 3: Standard Chart Operations ...3.1 3.1 Introduction ... 3.1 3.2 Using Chart Cards ... 3.2 Inserting a Chart Card ... 3.2 Removing a Chart Card ... 3.3 Displaying the Chart Data ...
  • Page 9 Clearing the Current Track ... 3.39 Managing Tracks ... 3.39 SmartRoute ... 3.41 Chapter 4: Further Chart Operations ...4.1 4.1 Introduction ... 4.1 4.2 Measuring Distances Using the VRM/EBL Key ... 4.2 4.3 Alarms and Timers ... 4.4 Alarm Reporting ... 4.4 Setting Alarms and Timers ...
  • Page 10 GPS SOG/COG Filter ... 5.10 Compass Set Up ... 5.10 Language ... 5.10 Simulator ... 5.10 5.4 Chart Set Up Parameters...5.11 Customize Chart ...5.11 Plotter Mode ... 5.12 Chart Orientation ... 5.12 Object Information ... 5.13 Waypoint Options ... 5.13 Vectors ...
  • Page 11 EMC Servicing and Safety Guidelines ... 7.1 7.2 Resetting the System ... 7.2 7.3 Problem Solving ... 7.3 Technical Support: ... 7.3 How to Contact Raymarine (US) ... 7.4 How to Contact Raymarine (Europe) ... 7.5 Worldwide Support ... 7.5 Appendix A: Specification ... A.1 SL520/530/631 PLUS Displays ...A.1...
  • Page 12 SL520/530/631 PLUS Chartplotter Displays...

  • Page 13: Chapter 1: Overview

    Chapter 1: Overview Chapter 1: Overview How to Use This Handbook This handbook describes the following displays: SL520 PLUS Chartplotter, 7" Mono Display SL530 PLUS Chartplotter, 7" Color Display SL631 PLUS Chartplotter, 10.4" Color Display If you are installing the display system yourself, you should read Chapter 6 before you start the installation.
  • Page 14 The following terminology is used to describechartplotter systems: Master Radar Display Chart Display Integrated System Additional instruments are connected via the SL520/530/631 PLUS Chartplotter Displays A unit capable of sourcing specific data such as chart data. Unit providing Radar Master functionality. Unit providing Chart Master functionality.

  • Page 15: General

    Chapter 1: Overview 1.1 General The display unit is waterproof to CFR46 and can be installed either above or below deck. The unit includes: • 7" or 10.4" PLUS display • Trackpad • Eleven dedicated (labeled) control keys • Four soft keys (unlabeled) whose functionality changes •...

  • Page 16: Operating Modes

    SeaTalk or NMEA 0183. Data from this equipment including position and heading is shown on the display and is used in calculations. Details on connecting other equipment are given in Chapter 6. SL520/530/631 PLUS Chartplotter Displays Full-screen mode Half-screen Window Options Chart...

  • Page 17: The Chartplotter Display

    Chapter 1: Overview 1.2 The Chartplotter Display The SL520/530/631 PLUS display includes a Chartplotter. The chartplotter includes a small-scale world map and detailed navigation information is displayed when a cartographic chart card is installed. The details displayed depend on the chart zoom level selected. A plotter mode is provided to enable...
  • Page 18 Note: The factory default for the CUSTOM settings is ON. Icons are displayed in detail, depth shading limit is 10 m and depth contour display is 0-100 m. A complete list of chart features is given in Appendix B. SL520/530/631 PLUS Chartplotter Displays Status Bar Vessel Position Cursor -...

  • Page 19: Chartplotter Functions

    Chapter 1: Overview Chartplotter Functions The Chartplotter includes the following functions: • Display C-MAP NT C-Card chart information including Ports and Tides (if available) View chart information (if available) for the Nearest Port • • Place, Move, Erase and Edit a Waypoint •...

  • Page 20: Operating Controls

    The trackpad has several functions: • To move the cursor around the screen • To select an item from a pop-up menu • To adjust a variable soft key control SL520/530/631 PLUS Chartplotter Displays Soft keys Dedicated keys Dedicated keys...
  • Page 21 Chapter 1: Overview The cursor is used to: • Select a position on the screen. • Select an item, e.g. chart object. • Pan the chart display. Moving the Cursor You can press on any of the four sections of the trackpad to move the cursor in that direction (up, down, left or right), or press two sections at the same time to move diagonally.

  • Page 22: Dedicated Keys

    The default soft keys are displayed until you press a key, or select an item on the screen; the soft keys associated with the action are then displayed. SL520/530/631 PLUS Chartplotter Displays Feature Data box (any type)

  • Page 23: Pop-Up Menus

    Chapter 1: Overview The currently selected soft key option is shown by its gray or green background. If the key text is displayed in gray rather than in black, it is not currently available. When you press a soft key one of the following happens: i.

  • Page 24: Database Lists

    For example, you can erase a waypoint or a route. SL520/530/631 PLUS Chartplotter Displays WAYPOINT LIST RNG _21.0nm...

  • Page 25: Chapter 2: Getting Started & Adjusting The Display

    Chapter 2: Getting Started & Adjusting the Display Chapter 2: Getting Started & Adjusting the Display 2.1 Introduction This chapter provides information and instructions to get you started using your display. It will help you to become familiar with the display and the functions of the controls before you start using the unit.

  • Page 26: Switching The Display On And Off

    To provide protection against the damaging effects of UV light, it is advisable to replace the sun cover provided when the color LCD display is not in use. A reminder is displayed when you switch off the color LCD display. SL520/530/631 PLUS Chartplotter Displays D4277-2...

  • Page 27: Simulator Mode

    Chapter 2: Getting Started & Adjusting the Display ➤ To switch the display unit off, press and hold the POWER key for three seconds. A countdown timer is displayed as shown below: Countdown timer: number of seconds to power off SECONDS Figure 2-2: Switch Off...

  • Page 28: Changing The Lighting & Contrast - Sl520 Mono Display

    Contrast set < 30% restored to 30% Contrast set > 70 % restored to 70% SL520/530/631 PLUS Chartplotter Displays D3935-3...

  • Page 29: Changing The Brightness - Sl530/631 Color Display

    Chapter 2: Getting Started & Adjusting the Display Changing the Brightness - SL530/631 Color Display The MULTI key on the color LCD display is used to adjust brightness. The brightness of the screen can be adjusted over a wide range, suitable for viewing in daylight (high brightness level) or at night (low brightness level).

  • Page 30: Controlling The Display

    The selected mode is shown full-screen; in Chart mode you can switch on half-screen windows for additional display, as described in the following section. If you press DISPLAY again, the pop-up and soft keys for the current mode are shown. SL520/530/631 PLUS Chartplotter Displays D4160-1...
  • Page 31 Chapter 2: Getting Started & Adjusting the Display Selecting a Half-Screen Window for Display Note: Windows can only be used with the Chart screen, they are not available on the data log screen. ➤ To select a window for display: 1.
  • Page 32 Hold the trackpad down to move the cursor faster. POWER Press and hold until unit beeps to turn on display. Press for 3 seconds to turn off display. SL520/530/631 PLUS Chartplotter Displays DISPLAY Controls display mode and windows. - Press for display mode and soft keys display.
  • Page 33 Chapter 2: Getting Started & Adjusting the Display CDI Window BDI Window D6110_1 Navdata Window Figure 2-3: Half-Screen Window Options...

  • Page 34: Customizing The Screen Presentation Options

    Chapter 5:Setting Up the System Defaults. The default data box positions are along the bottom of the display. Each box can be moved to the required position on the screen using the context-sensitive cursor. SL520/530/631 PLUS Chartplotter Displays D4177-1...
  • Page 35 Chapter 2: Getting Started & Adjusting the Display Note: If you select BDI, CDI or Nav Data for display in a half-screen window, the data boxes are temporarily hidden. At any time, you can switch the group of data boxes on or off using the SCREEN soft key.

  • Page 36: Chart Display Control Functions

    ➤ You use the context sensitive cursor to select and move your vessel’s position off-center (the label POS is displayed). See Moving and deleting items with the context-sensitive cursor on page 1-9. SL520/530/631 PLUS Chartplotter Displays...
  • Page 37 Chapter 2: Getting Started & Adjusting the Display 2-13 D4278-1 Figure 2-4: Changing the Chart Center Using FIND SHIP FIND SHIP is used in chart mode to re-draw the chart with the vessel at the center and the cursor homed onto the vessel. D4160-1 When you press FIND SHIP the following occur: •...
  • Page 38 RANGE key to zoom in again, re-positioning the cursor first if required. An area of further chart detail is indicated by a box around the area as shown in Figure 2-6. SL520/530/631 PLUS Chartplotter Displays Vertical distance displayed on chart Status Bar...
  • Page 39 Chapter 2: Getting Started & Adjusting the Display Chart Boundary - indicates further detail is available inside Figure 2-6: Chart Boundaries 4. When no further chart detail is available, as you press the bottom of the RANGE key, the effect depends on whether Plotter Mode is on or off as follows: •...

  • Page 40: Typical Chart Scenarios

    • Working with Waypoints Place a Waypoint Goto a Waypoint • Make and Follow a Route Create a Route Follow a Route • Review the Passage Plan View Route Information Change the SOG, Hours and ETA. SL520/530/631 PLUS Chartplotter Displays...
  • Page 41 Chapter 2: Getting Started & Adjusting the Display 2-17 This page intentionally left blank.

  • Page 42: Place And Goto A Waypoint

    2-18 Place and Goto a Waypoint SL520/530/631 PLUS Chartplotter Displays 1. Press MARKS 2. Position Cursor as required Press the soft key Press the soft key to go to the waypoint selected by the cursor. D4267-1...
  • Page 43 Chapter 2: Getting Started & Adjusting the Display The vessel navigates towards the target waypoint See: 5.3 Working wth Waypoints Go to an individual Target Point, page 5-26. D4267-2a 2-19...

  • Page 44: Make And Follow A Route

    2-20 Make and Follow a Route SL520/530/631 PLUS Chartplotter Displays Press the soft key Press the soft key 1. Position Cursor - in this example over an existing waypoint 2. Press the soft key Position Cursor for next waypoint, then press soft key.
  • Page 45 Chapter 2: Getting Started & Adjusting the Display Press the soft key. The route becomes the current route. Press the soft key Press the soft key The vessel starts to navigate to the first (target) waypoint in the route. See: 5.4 Working wth routes, Follow a route, page 5-24.

  • Page 46: Review Your Passage Plan

    2-22 Review Your Passage Plan SL520/530/631 PLUS Chartplotter Displays Press the soft key Press the soft key Press the soft key 1. Use the trackpad to move selection bar over required route. 2. Press the soft key Time defaults to ETA - and assumes the current time is the start time.
  • Page 47 Chapter 2: Getting Started & Adjusting the Display See: Displaying Route Information page 5-18. Change the TIME to HOURS - the display indicates it will take 32 minutes to reach the destination. You can change the PLANNED SOG; the display updates to indicate TIME required at the planned speed.
  • Page 48 2-24 SL520/530/631 PLUS Chartplotter Displays...

  • Page 49: Chapter 3: Standard Chart Operations

    Chapter 3: Standard Chart Operations Chapter 3: Standard Chart Operations 3.1 Introduction This chapter explains how to use the chart functions to navigate with your display. It covers the following topics: • Using chart cards. • Controlling waypoints, including placing, moving, editing and deleting waypoints.

  • Page 50: Using Chart Cards

    The card will be held in place by the pegs. 5. Close the card cover until it clicks shut, to prevent water entering the dis- play unit. SL520/530/631 PLUS Chartplotter Displays...

  • Page 51: Removing A Chart Card

    Chapter 3: Standard Chart Operations Figure 3-1: Removing the Chart Card Removing a Chart Card We recommend that before you remove a chart cartridge, you ensure the chart is not being used on any other display unit. Removing a chart cartridge whilst a display unit is accessing the chart may cause an operational error.

  • Page 52: Displaying Chart Object And Source Information

    3. Press CLEAR to remove the pop-up from the screen and return to the default display. SL520/530/631 PLUS Chartplotter Displays D4260-2...
  • Page 53 Chapter 3: Standard Chart Operations Port Area At large chart scales port area information is indicated by the symbol . An object information pop-up provides the name of the marina or port and a list of the facilities available. Where available, details for each facility can be displayed. This information includes items such as accommodation, slip sizes, fueling, sanitation, electrical or other maintenance services provided, VHF channels monitored, and other safety and navigation information.
  • Page 54 SET DATE; to change date, use the trackpad to move the cursor left/right to select the character and up/down to increase/decrease the value. The graph and tide data will be updated accordingly. SL520/530/631 PLUS Chartplotter Displays 10 12 14 16 18 20 22 24 D4270-2...
  • Page 55 Chapter 3: Standard Chart Operations Nearest You can obtain information for the eight nearest waypoints, port services, ports, tide stations, wrecks or obstructions for a selected position. The chartplotter also provides options to redraw the chart with a selected item at the centre, Goto a waypoint and display a list of all the port on the chart card.

  • Page 56: Working With Waypoints

    • Displaying Waypoint data • Editing a Waypoint (symbol, name & position) • Erasing a Waypoint • Moving a Waypoint At the end is a section about using the ST60/80 Navigator Keypad to select, edit, and name your waypoints. SL520/530/631 PLUS Chartplotter Displays...

  • Page 57: Placing A Waypoint

    Chapter 3: Standard Chart Operations Placing a Waypoint The scenario Place and Goto a Waypoint on page 2-18 provides a simple example of how to place a waypoint. ➤ To access the place waypoint soft keys, press MARKS: PLACE WPT MARKS MARKS AT CURSOR...

  • Page 58: Waypoint List

    Loran TDs in the Waypoint List, you can subsequently only edit the position as Lat/Long coordinates. TD entries in the Waypoint List are shown only for those waypoints which were entered as TDs. SL520/530/631 PLUS Chartplotter Displays WAYPOINT LIST RNG _21.0nm...
  • Page 59 Chapter 3: Standard Chart Operations WPT POSITION (LORAN TDs) 3. Edit the Loran parameters as required, using: i. The CHAIN soft key, which enables selection of both the Chain and it’s Slave: WPT POSITION (LORAN TDs) ii. The ASF1/ASF2 soft key, which presents two soft keys for editing ASF 1 and ASF 2 parameters independently: iii.

  • Page 60: Selecting A Waypoint

    The waypoint data box is displayed, this indicates waypoint number/name, bearing and range (or latitude and longitude if selected in system set up). D4250-1 While the cursor is over the waypoint, the waypoint soft keys are displayed. SL520/530/631 PLUS Chartplotter Displays D4163-1...

  • Page 61: Editing The Waypoint Details

    Chapter 3: Standard Chart Operations ➤ To remove the waypoint data box and soft keys either: Move the cursor away from the waypoint, or press CLEAR. ➤ To display the waypoint details from the waypoint list: Select the waypoint in the list as described above. MARKS The details for the selected waypoint are displayed in the lower half of the window.

  • Page 62: Erasing A Waypoint

    Moving a Waypoint You can move any waypoint except the target waypoint (the waypoint you are following). You can use the Waypoint soft keys and cursor to move the selected waypoint, or you can edit the waypoint position. SL520/530/631 PLUS Chartplotter Displays...

  • Page 63: Using The St60 Or St80 Navigator Keypad

    Chapter 3: Standard Chart Operations CAUTION: Take care when editing waypoints as it is possible to move waypoints that are used in routes stored in the Route Database. In such instances, the stored route will include the waypoint in its new ➤...
  • Page 64 6-GUN because no entries begin with a 7 and 6 is the next previous beginning number. 2. Use the ins key like the display’s ENTER key, to close the Waypoint List. The del key and left and right arrow keys do not function in select mode. SL520/530/631 PLUS Chartplotter Displays...
  • Page 65 Chapter 3: Standard Chart Operations Editing Entries in the Waypoint, Route, or Track Lists You can also use the Navigator Keypad to edit an existing item or to name a new item in the Waypoint List, Route List, or Track List. You first must enter the edit mode for the list you want to modify.

  • Page 66: Working With Routes

    • Displaying route information, including the route leg data and waypoint details. Use the waypoint details to review your passage plans for different speeds. • Using the database list to erase and name existing routes. • Editing a route by adding, removing and moving waypoints. SL520/530/631 PLUS Chartplotter Displays...

  • Page 67: Creating A New Route

    Chapter 3: Standard Chart Operations ➤ To access the route soft keys, press the default soft key ROUTE: Creating a New Route Note: If there is a current route, it is cleared when you select MAKE ROUTE. If you are following the current route you are prompted to STOP FOLLOW. Press the YES soft key to continue, or NO to abandon route creation.
  • Page 68 1. Press the ROUTE soft key; the route soft keys are displayed. 2. Press the MAKE ROUTE soft key; the make route soft keys are displayed. 3. Press the USE WPT LIST soft key; the MAKE ROUTE screen is displayed with its associated soft keys. SL520/530/631 PLUS Chartplotter Displays D4167-1A...
  • Page 69 Chapter 3: Standard Chart Operations WAYPOINTS 348° 2.30 The available Waypoints are listed in the left hand column (alphanumeric); the right hand column lists the waypoints in the New Route, the number indicates its order in the route. The lower part of the table shows position, bearing and range of the highlighted waypoint.

  • Page 70: Saving The Current Route

    If you wish to name the route press the YES soft key. Use the trackpad to move the cursor right or left to the character you wish to edit. Then use the top or bottom of the trackpad to increase or decrease the letter or number. SL520/530/631 PLUS Chartplotter Displays SAVE ROUTE D4155-1...

  • Page 71: Clearing The Current Route

    Chapter 3: Standard Chart Operations You can use a Navigator Keypad (see Using the ST60 or ST80 Navigator Keypad on page 3-15) to name the route. 5. Press ENTER to finish and clear the Name List, or press CLEAR to cancel the operation.

  • Page 72: Displaying Route Information

    WPT are displayed. The waypoint data box is displayed, this box includes the route and waypoint number. To remove the data box, move the cursor away from the route or press CLEAR. SL520/530/631 PLUS Chartplotter Displays ROUTE LIST D4263-1...
  • Page 73 Chapter 3: Standard Chart Operations Using Route Information to Review Your Passage Plan You can view data for all the waypoints in the current route, or any saved route. You select the route from the database list and the information is displayed in a Route Information pop-up;...

  • Page 74: Using The Route List To Erase And Name A Route

    Press NO to cancel the operation, then ENTER or CLEAR if you wish to remove the route list. Press YES to erase the route from the list, then ENTER or CLEAR to remove the route list. SL520/530/631 PLUS Chartplotter Displays D4264-1...

  • Page 75: Editing A Route

    Chapter 3: Standard Chart Operations 3. If you NAME a route, use the trackpad to move the cursor right or left to the character you wish to edit. Then use the top or bottom of the trackpad to increase or decrease the letter or number. 4.
  • Page 76 RTE are dis- played. The route soft keys are displayed. 2. Press the REVERSE ROUTE soft key. The current route is reversed on the screen. SL520/530/631 PLUS Chartplotter Displays...

  • Page 77: Following Routes And Going To Points

    Chapter 3: Standard Chart Operations 3.5 Following Routes and Going to Points The default soft key GOTO accesses the functions to FOLLOW a route and GOTO a waypoint or cursor. When you select the target destination, the chartplotter calculates bearing, distance and cross track error; this information is passed to a helmsman or autopilot.
  • Page 78 1. Place the cursor over the route leg until the letters RTE and the route soft keys are displayed. Press REVERSE ROUTE then FOLLOW ROUTE. Your vessel’s current position becomes the origin, and the target waypoint in the current route becomes the active target. SL520/530/631 PLUS Chartplotter Displays D4251_1 D4172-1...

  • Page 79: Target Point Arrival

    Chapter 3: Standard Chart Operations Target Point Arrival The arrival alarm is used to alert you when the vessel is approaching the target point. The arrival alarm is defined as a circle (not visible on the screen) around the target. You can specify radius of the arrival alarm (see Section 4.3). The alarm is triggered when either of the following conditions is met: •...

  • Page 80: Going To An Individual Target Point

    1. Use the trackpad to position the cursor over the required waypoint until the letters WPT and the waypoint soft keys are displayed. Alternatively, you can select the waypoint from the waypoint list as described in Section 3.3. SL520/530/631 PLUS Chartplotter Displays D4172-1 D4163-1...

  • Page 81: Stop Follow Or Stop Goto

    Chapter 3: Standard Chart Operations 2. Press the GOTO WAYPOINT soft key. Navigation to the selected waypoint begins. The soft key STOP GOTO is dis- played. 3. To return to the default soft key display, move the cursor away from the waypoint or press ENTER or CLEAR.

  • Page 82: Transferring Waypoints And Routes

    NMEA using the SEND WPT LIST function. Sending the waypoint list does not affect current routes. The NMEA link could be to a PC. CAUTION: The function LOAD USER CARD replaces the existing waypoint and route lists with the transferred lists. SL520/530/631 PLUS Chartplotter Displays...
  • Page 83 Chapter 3: Standard Chart Operations ➤ To save waypoints to, or load waypoints from a user cartridge: CAUTION: Loading waypoints from a user cartridge overwrites any existing waypoint and route lists. 1. Insert a C-MAP User Card into the lower of the two cartridge slots. 1.
  • Page 84 2. Press the soft key SEND WPT LIST ON NMEA. The soft key changes to STOP SENDING WAYPOINTS. The waypoint and route lists are transmitted from the chartplotter to other instruments on NMEA. SL520/530/631 PLUS Chartplotter Displays USER CARD MENU...

  • Page 85: Using Tracks

    Chapter 3: Standard Chart Operations 3.7 Using Tracks The Track function is used to mark on-screen the trail that your vessel has followed, as if it had left a visible fixed wake. While the track is switched on it is recorded in the display unit’s memory. You specify the interval at which track points are made and a line is drawn on- screen between each point.

  • Page 86: Setting Up A Track

    UP arrow to increase the interval, the DOWN arrow to decrease the interval. Press ENTER to return to the track soft keys. SL520/530/631 PLUS Chartplotter Displays 2 hrs, 5 min 6 hrs, 15 min 12 hrs, 30 min...

  • Page 87: Clearing The Current Track

    Chapter 3: Standard Chart Operations 2. Press the TRACK OFF ON soft key to toggle tracks on. Your vessels trail will be displayed on-screen, with a line joining the points at the selected interval. Clearing the Current Track You can clear the current track from the screen. When you select CLEAR TRACK, if the current track has not been saved, you have the option of saving it.
  • Page 88 Current Track. Alternatively, press the NO soft key to cancel the SHOW TRACK operation. The track list is removed and the selected track is displayed. 5. Press ENTER or CLEAR to return to the default display. SL520/530/631 PLUS Chartplotter Displays D4256-1...

  • Page 89: Smartroute

    Chapter 3: Standard Chart Operations SmartRoute SmartRoute enables the current track, or the last segment of a track with breaks, to be converted to a route (the track could have been retrieved from the track list). SmartRoute places a waypoint at the last track point, then considers each point in turn and determines the closest route through the recorded track.
  • Page 90 3-42 SL520/530/631 PLUS Chartplotter Displays...

  • Page 91: Chapter 4: Further Chart Operations

    Chapter 4: Further Chart Operations Chapter 4: Further Chart Operations 4.1 Introduction This chapter explains how to use the additional functions that are provided on the chartplotter display. It covers the following topics: • Measuring distances and bearings on the chart, using the VRM/EBL key •...

  • Page 92: Measuring Distances Using The Vrm/Ebl Key

    4. Press ENTER to fix the end point of the ruler line, and return to normal cur- sor control. The letter B marks the location of the end point on the chart. Figure 4-1: Measuring Distance Using a VRM SL520/530/631 PLUS Chartplotter Displays...
  • Page 93 Chapter 4: Further Chart Operations ➤ To re-position one end of the ruler line: 1. Move the cursor over the ruler line towards the end that you want to re- position, until the letters A¡ B are displayed. 2. Press ENTER to take cursor control of the ruler. The ruler end moves to the cursor which changes to a four-headed arrow.

  • Page 94: Alarms And Timers

    You can silence these alarms by pressing any key. No other action is taken by the chartplotter except to silence the alarm. SL520/530/631 PLUS Chartplotter Displays Indicates: Your vessel has arrived at the active waypoint: it has either...

  • Page 95: Setting Alarms And Timers

    Chapter 4: Further Chart Operations Setting Alarms and Timers ➤ To set up an alarm or timer: 1. Press the ALARMS key. The Alarms Set Up menu is displayed, showing ALARMS the current settings (see Figure 4-2). 2. Use the trackpad to move the selection bar up or down the options. As each line is highlighted, the soft key labels are updated to show the current set- tings and controls.

  • Page 96: Man Overboard (Mob)

    • Sounds a 4-second alarm pattern every 30 seconds. • Sends an MOB message (including bearing and distance) to other units in the system, via the SeaTalk connection. Figure 4-3: MOB Display SL520/530/631 PLUS Chartplotter Displays MOB data box which replaces any MOB position D4273-2...

  • Page 97: Cursor Echo

    • SeaTalk Cursor Out: enables the output, onto SeaTalk, of the display’s own cursor (default - OFF). • Cursor Echo Local: - not valid for the SL520/530/631 PLUS display. If you set the options to OFF, no cursor echo information is displayed.

  • Page 98: Gps Setup

    • NO FIX, where no fix can be acquired. ➤ To select GPS Set Up: MENU Press MENU, then press the GPS SETUP... soft key. The Navigation Status pop-up window shown in Figure 4-4 is displayed. SL520/530/631 PLUS Chartplotter Displays NAVIGATION STATUS D4281-2...

  • Page 99: Restart Gps

    Chapter 4: Further Chart Operations Restart GPS This soft key enables re-acquisition of a GPS position fix. Note: Under normal circumstances RESTART GPS is not required. D-GPS Set Up The D-GPS SET UP function provides the ability to set up an external Differential GPS, either automatically (default) or by manually retuning it to a different differential beacon.

  • Page 100: Data Log Mode

    As shown in Figure 4-5, the chartplotter records the time and vessels position. Every thirty minutes the time, new position, distance made good and course made good are recorded. The START LOG soft key changes to STOP LOG. SL520/530/631 PLUS Chartplotter Displays...
  • Page 101 Chapter 4: Further Chart Operations TIME POSITION Figure 4-5: Data Log Window ➤ To stop recording log entries: Press the STOP LOG soft key. ➤ To clear the log entries: Press the CLEAR LOG soft key, you are prompted “Are You Sure”. To cancel the CLEAR LOG operation press the NO soft key.
  • Page 102 4-12 SL520/530/631 PLUS Chartplotter Displays...

  • Page 103: Chapter 5: Setting Up The System Defaults

    Chapter 5: Setting Up the System Defaults Chapter 5: Setting Up the System Defaults 5.1 Introduction Once you have installed your display unit and are familiar with its basic operation (described in Chapter 1 and Chapter 2), you need to set it up so that it obtains the correct information from the equipment you have connected it to, operates according to your requirements, and displays information according to your preferences.

  • Page 104: Changing The Set Up Parameters

    For sliders, press the appropriate soft key repeatedly to increase or decrease the slider value in individual steps, or press and hold the key to change the setting quickly. SL520/530/631 PLUS Chartplotter Displays D4162-1...
  • Page 105 Chapter 5: Setting Up the System Defaults 5. Once you have set all the required values, press ENTER to clear the menu and return to the set up soft keys. 6. Press ENTER, MENU or CLEAR to clear the soft keys and return to the default display.

  • Page 106: System Set Up Parameters

    SOFT KEYS KEY BEEP MOB DATA PILOT POP-UP MENU TIMEOUT PERIOD DISTANCE UNITS SPEED UNITS DEPTH UNITS TEMPERATURE UNITS SL520/530/631 PLUS Chartplotter Displays Options Factory Default OFF, LAT/LONG, TDs OFF or ON OFF or ON OFF or ON OFF or ON...
  • Page 107 OFF or ON OFF or ON OFF or ON OFF or ON OFF or ON OFF or ON OFF or ON Not valid for SL520/530/631 PLUS display OFF or ON Not valid for SL520/530/631 PLUS display DD/MM/YY, MM/DD/YY MM/DD/YY 12 HOUR, 24 HOUR...

  • Page 108: Data Boxes

    On and Off on page 2-10.) Day/Night This option allows you to change the display between day and night modes. If you select NIGHT mode, a different palette, more suited to night time viewing is used. SL520/530/631 PLUS Chartplotter Displays...

  • Page 109: Help

    Chapter 5: Setting Up the System Defaults Help When Help is set to ON, a prompt appears when selecting a soft key or menu choice, and when using the context-sensitive cursor. The help message is cleared when an action is selected. Soft Keys When the Soft Keys option is set to ON, the default soft keys are displayed if no other operation is in progress.

  • Page 110: Variation Source

    Bridge NMEA Heading The display bridges NMEA input data to the SeaTalk bus (see Section 6.8). The Bridge NMEA Heading option can be used to prevent NMEA heading data being bridged onto the SeaTalk bus. SL520/530/631 PLUS Chartplotter Displays...

  • Page 111: Nmea Out Set Up

    • Radar Cursor In: displays the cursor from a radar on the chart display (default - OFF). • Chart Cursor In: - not valid for the SL520/530/631 PLUS display. Note: The remote display must have SeaTalk Cursor Out enabled. Raymarine recommend that in multi-display systems, you do not enable Cursor Out on more than two displays.

  • Page 112: Sl520/530/631 Plus Chartplotter Displays

    Select the SOG/COG filter setting as required. This can be set to HIGH, MEDIUM or LOW. Compass Set Up This option is used to calibrate a Raymarine heading sensor such as the Pathfinder Smart Heading System. Controls are provided for Linearise Compass which detects and corrects for heading errors caused by metal objects, and Align Heading which matches the displayed heading to a known heading or transit.

  • Page 113: Chart Set Up Parameters

    OFF, ON OFF, OFF OFF, 3 MINS, 10 MINS, INFINITE OFF, 3 MINS, 10 MINS, INFINITE OFF, 10 MINS, 1 HOUR, INFINITE Not valid for SL520/530/ 631 PLUS display WGS 84, LOCAL WGS 84 SET UP, OFF/ON 5-11 New Default...

  • Page 114: Plotter Mode

    To update the Course Up reference while Course Up is the current mode, re-select Course Up from the set up menu. • Head Up: The chart is displayed with the vessel’s current heading upwards. As the heading changes the chart will rotate. SL520/530/631 PLUS Chartplotter Displays...

  • Page 115: Object Information

    Tide Vector indicates the tide angle. Tide information is calculated from the speed through water, compass and position data. Radar/Chart Synch Not valid for SL520/530/631 PLUS display. Datum Selection You can select either WGS 84 or LOCAL datum. In LOCAL mode, you are presented with a list of datums;...

  • Page 116: Position Offset

    2. Use the trackpad to move the cursor to the required vessel position; the cur- sor position is displayed in a position offset data box. 3. Press the ACCEPT OFFSET soft key, the vessel is displayed at the new posi- tion. Press ENTER to return to the default display. SL520/530/631 PLUS Chartplotter Displays...

  • Page 117: Chapter 6: Installation

    Chapter 6: Installation Chapter 6: Installation 6.1 Introduction This chapter provides installation instructions for your SL520/530/631 PLUS display. Details for mounting the SL520/530/631 PLUS display and connecting the equipment are included. • To install display unit follow the instructions in Section 6.2 to Section 6.6.

  • Page 118: Planning The Installation

    Section 6.4. EMC Installation Guidelines All Raymarine equipment and accessories are designed to the best industry standards for use in the recreational marine environment. Their design and manufacture conforms to the appropriate Electromagnetic Compatibility (EMC) standards, but correct installation is required to ensure that performance is not compromised.
  • Page 119 Typical Suppression Ferrites Connections to Other Equipment If your Raymarine equipment is to be connected to other equipment using a cable not supplied by Raymarine, a suppression ferrite MUST always be attached to the cable near to the Raymarine unit.

  • Page 120: Unpacking And Inspecting The Components

    Ferrite for SeaTalk Cable Seatalk junction 3-way block D244 Seatalk auxiliary junction box R55006 NMEA OUT cable assy 4 ft 11 in (1.5m) R55005 SL520/530/631 PLUS Chartplotter Displays Supplied with: Option for: SL520 PLUS SL530 PLUS SL631 PLUS SL520/530 PLUS SL631 PLUS...

  • Page 121: Selecting The Display Unit Location

    Chapter 6: Installation 6.3 Selecting the Display Unit Location The display unit can be mounted using the mounting bracket supplied, or console mounted using the optional flush-mounting kit. The dimensions of the display unit, including the bracket, are shown in Figure 6-3, Figure 6-5 and Figure 6-4.
  • Page 122 POWER Figure 6-3: 7” Mono LCD Display Dimensions SL520/530/631 PLUS Chartplotter Displays GAIN DISPLAY VRM/EBL MARKS MULTI ALARMS RANGE ENTER CLEAR MENU Weight: 1.2 Kg (2.6 lbs) Compass Safe Distance: 1 m (39 in) D3221_3...
  • Page 123 Chapter 6: Installation 10.51 in (267 mm) 8.8 in (223.6 mm) POWER 3.15 in (80 mm) 6.3 in (160 mm) 8.85 in (225 mm) Figure 6-4: 7” Color LCD Display Dimensions 0.95 in (24.3 mm) 6.89 in (175 mm) GAIN DISPLAY VRM/EBL MARKS...
  • Page 124 Figure 6-5: 10.4” Color LCD Display DImensions SL520/530/631 PLUS Chartplotter Displays 11.5 in (292 mm) 12.9 in (328 mm) 9.7 in (246 mm) 0.87 in (22.1 mm) 7.88 in (200 mm) 1.7 in (43 mm) 11.26 in (286 mm) 3.82 in (97 mm) 6.38 in (162 mm)

  • Page 125: Cable Runs

    Chapter 6: Installation 6.4 Cable Runs Consider the following before installing the system cables: • You need to attach the power cable. Additional cables will be required if you are installing an integrated system. • All cables should be adequately secured, protected from physical damage and protected from exposure to heat.

  • Page 126: Mounting The Display Unit

    The display unit can be console mounted if required, using the optional flush- mounting kit (M92708 or E55033). CAUTION: Make sure there are no hidden electrical wires or other items behind the location before proceeding. Make sure there is sufficient rear access for mounting and cabling. SL520/530/631 PLUS Chartplotter Displays...
  • Page 127 Chapter 6: Installation 1. A clear, flat area of the following dimensions is required: Display 7” Mono Display 7” Color Display 10.4” Color Display 2. Unpack the flush-mounting kit. 3. Using the supplied template, trace out the display unit opening. 4.

  • Page 128: System Connections

    The power connection to the display should be made at either the output of the battery isolator switch, or at a DC power distribution panel. Raymarine recommends that power is fed directly to the display via its own dedicated cable system and MUST be protected by a thermal circuit breaker or fuse, installed close to the power connection.

  • Page 129: Display Unit Connection

    Chapter 6: Installation Display Unit Connection The rear of the display provides the following connection sockets: • SeaTalk, for SeaTalk data input and output. • NMEA Output, for NMEA data output in an integrated system. • Power/NMEA Input, for 12 V, 24 V or 32 V DC power connection, two NMEA 0183 inputs and one RF ground (screen) connection.
  • Page 130 BLACK wire to the feed from the negative (–) battery terminal. The shielded wire (screen) should be connected to the ship’s RF ground as previously described in Grounding the System on page 6-12. Any unused wires should be insulated and taped back. SL520/530/631 PLUS Chartplotter Displays Color Orange Yellow...

  • Page 131: System Checks And Inital Switch On

    Chapter 6: Installation 6.7 System Checks and Inital Switch On Once you have installed your Chartplotter and made all the connections, you need to check your installation and perform the System Checks before using the system for navigation. It is strongly recommended that the System Checks are performed before connecting the display to other equipment in an integrated system.

  • Page 132: Emc Conformance

    6-16 SL520/530/631 PLUS Chartplotter Displays SYSTEM SET UP MENU D3650-6 Figure 6-9: System Set Up Menu 3. Use the trackpad to move the selection bar down to the LANGUAGE option. The soft key labels are updated. 4. Use the soft keys to highlight the required language.

  • Page 133: Integrated Systems

    Chapter 6: Installation 6.8 Integrated Systems The displays can be linked to other equipment to transfer data as follows: • Data can be received via SeaTalk or NMEA, some of which will increase the functionality of the display. Other data can be viewed on the display. •...

  • Page 134: Seatalk And Nmea In

    Other data connected via a SeaTalk bus or via NMEA is generally displayed in data boxes, e.g. depth, apparent wind angle and speed, time. Note: The Raymarine Fishfinder uses its own depth data, rather than any oth- er depth data on SeaTalk. If there is no other depth data on SeaTalk, Fishfind- er depth is transmitted.

  • Page 135: Seatalk Connection

    Chapter 6: Installation SeaTalk is a precise, high-speed, bi-directional protocol which is flexible enough to adapt to any number of instruments, without a central processor. SeaTalk equipment can also communicate with non-SeaTalk equipment via the NMEA standard. SeaTalk Connection SeaTalk data, if present, is the primary source for all navigational data except heading.
  • Page 136 (Channel 2). Refer to Power and NMEA Input Connection on page 6-14 for further details. For example, to connect a Raymarine Heading Sensor to the NMEA Channel 1 input, connect the cables and power supply using a suitable connector block, as shown in the diagram below.

  • Page 137: Using The Seatalk Auxiliary Junction Box

    Chapter 6: Installation Figure 6-11: NMEA Input Connection Using the SeaTalk Auxiliary Junction Box A junction box (provided with the chartplotter display) is used to connect the SeaTalk system to the display unit. This junction box enables the SeaTalk bus, power and GPS to be connected.

  • Page 138: Data Output

    The SeaTalk input/output connection is detailed in SeaTalk Connection on page 6-19. The NMEA output connector is a 4-pin connector as illustrated below. The 1.5 m NMEA OUT cable has a ferrite clamp attached to ensure EMC conformance. SL520/530/631 PLUS Chartplotter Displays Core Terminal Black (screen) Yellow...

  • Page 139: Data Conversion

    Chapter 6: Installation NMEA OUT connector Pin 2, white Pin 5, screen Rear of display Figure 6-13: NMEA Output Connector Data Conversion The displays convert some information across the communications links as follows: NMEA In to NMEA Out and SeaTalk SeaTalk to NMEA Out This enables data received by the display to be passed to other instruments.

  • Page 140: Integrated System Checks

    An NMEA Out connector is used to transmit navigation data. The NMEA Output cable should be connected to the upper, left connector on the rear of the display unit. Note: The NMEA Output cable has a ferrite clamp attached to ensure EMC conformance. SL520/530/631 PLUS Chartplotter Displays...

  • Page 141: Chapter 7: Maintenance And Problem Solving

    EMC Servicing and Safety Guidelines • Raymarine equipment should be serviced only by authorized Raymarine service technicians. They will ensure that service procedures and replace- ment parts used will not affect performance. There are no user serviceable...

  • Page 142: Resetting The System

    In order to minimise these effects and enable you to get the best possible performance from your Raymarine equipment, guidelines are given in the installation instructions, to enable you to ensure minimum interaction between differ- ent items of equipment, i.e.

  • Page 143: Problem Solving

    The factory default settings are listed in Section 5.3 7.3 Problem Solving All Raymarine products are, prior to packing and shipping, subjected to comprehensive test and quality assurance programs. However, if this unit should develop a fault, please refer to the following table to identify the most likely cause and the corrective action required to restore normal operation.

  • Page 144: How To Contact Raymarine (Us)

    For Accessories and Parts Many Raymarine accessory items and parts can be obtained directly from your authorized Raymarine dealer. However, if you are in need of an item not available from the retailer, please contact Raymarine Technical Services at: 1-800-539-5539 extension 2333 or (603) -881-5200.

  • Page 145: How To Contact Raymarine (Europe)

    Installation chapter of this manual, and have the Raymarine part number ready when speaking with your dealer. If you are uncertain about what item to choose for your Raymarine unit, please contact our Customer Services Department prior to placing your order.
  • Page 146 SL520/530/631 PLUS Chartplotter Displays...

  • Page 147: Appendix A:specification

    Appendix A: Specification Appendix A:Specification SL520/530/631 PLUS Displays General Approvals: CE - conform to FCC - conforms to Size: 7”mono 7” color 10.4” color Weight 7”mono 7” color 10.4” color Mounting Power 7"mono 7” color 10.4” color Environmental: Op/Storage Temp. Range -mono...

  • Page 148: Chartplotter Features

    Routes Track History Alarms Navigation Information Variation Source SL520/530/631 PLUS Chartplotter Displays 1 x SeaTalk, receive and transmit 1 x NMEA 0183, transmit 2 x NMEA 0183, receive C-MAP cartridge reader - 2 slots Cursor Echo between radar and chart on separate displays connected via SeaTalk.
  • Page 149 Appendix A: Specification Interfacing SeaTalk Input NMEA Input SeaTalk Output NMEA Output (User selectable) Depth, Speed Over Ground & Course Over Ground, Position, Waypoint number, range, bearing and time to go, Speed through water, Time, Cross Track Error, Heading, Wind, Date, Log/Trip, Pilot Status, Temperature, Man Overboard, and cursor position NMEA 0183 (GLL, GGA, GLC, GTD, VTG, BWC, BWR, RMA, RMB, RMC, XTE, VHW, HDG, HDM, HDT, DBT, DPT, APB,VLW, MWV,...
  • Page 150 SL520/530/631 PLUS Chartplotter Displays...

  • Page 151: Appendix B: C-Map Chart Card Features

    Appendix B: C-MAP Chart Card Features Appendix B: C-MAP Chart Card Features The C_MAP chart cards display cartographic features which are derived from a library of symbols. The library includes a set of 16 x 16 pixel bitmaps which provide realistically shaped icons for many chart objects. However, these complex icons can overlap and clutter the display at some scales, so it possible for the user to select smaller, simple icons.
  • Page 152 Military practice area MARINE FEATURES Tideways & Cur- rents Tideway Water turbulence Tide height SL520/530/631 PLUS Chartplotter Displays Tracks and Routes Deep water route part Deep water route cen- terline Fairway Ferry route Navigation line Precautionary area Radar line...
  • Page 153 Appendix B: C-MAP Chart Card Features Menu Option Chart Features LAND FEATURES Natural Features Coastline Dune Hill Land elevation Land region Land Salt pan Slope topline Tree Vegetation area Natural Features - Rivers Canal Canal bank Rapids River River bank Waterfall Lake Lake shore...
  • Page 154 Shoreline construction Slipway Weir Small craft facility CARTOGRAPHIC Line, generic OBJECTS Area, generic NATURAL FEATURES Land area Bridge SL520/530/631 PLUS Chartplotter Displays Services Port Information Coastguard station Port area Pilot boarding Harbour master place Coast Guard Rescue station Police Signal station, traf-...
  • Page 155 Appendix B: C-MAP Chart Card Features The following chart features are always displayed: Menu option Chart features ROCKS Underwater Rock WRECKS Wrecks DEPTHS 1 Depth area DEPTHS 2 Dredged area DEPTHS 3 Intertidal area PORTS Mooring/Warping facility CAUTION AREAS Fish haven OFFSHORE INSTALLA- Diffuser TIONS...
  • Page 156 SL520/530/631 PLUS Chartplotter Displays...

  • Page 157: Appendix C: Seatalk And Nmea Data Received And Transmitted

    Appendix C: SeaTalk and NMEA Data Received and Transmitted Appendix C: SeaTalk and NMEA Data Received and Transmitted The following table defines the data received on the NMEA/SeaTalk ports. Data sources are listed in order of priority except where indicated. Data Received Position (LAT/LON) Position (Loran C TD’s)
  • Page 158 MOB data Cursor Range & Bearing Heading mode Waypoint/Route Transfer Global Alarm Waypoint Arrival Alarm Bridged from NMEA if selected in the System Set Up menu. SL520/530/631 PLUS Chartplotter Displays SeaTalk NMEA Out ✔ GGA, GLL, RMC, RMA ✔ ✔...

  • Page 159: Appendix D:abbreviations

    Appendix D: Abbreviations Appendix D:Abbreviations ANSI CCFL dGPS IEEE in, " American National Standards Institute American Wire Gauge Bearing and Distance Indicator Bearing Cold Cathode Fluorescent Lamp Course Deviation Indicator Code of Federal Regulations Course Made Good Course Over Ground Cathode Ray Tube Center deciBels...
  • Page 160 NMEA SL520/530/631 PLUS Chartplotter Displays Liquid Crystal Display longitude Magnetic meters Main Bang Suppression millimeter Man OverBoard Mark nautical mile National Marine Electronics Association Position (of vessel) Radio Frequency Range Revolutions Per Minute Single Side Band Ships Heading Marker Speed Over Ground...

  • Page 161: Index

    Index Accessories 6.4 Adding a Waypoint to a Route 3.18 Alarm Clock Alarm 4.4 Alarms Alarm Clock 4.4 Anchor 4.4 Arrival 3.31 Countdown Timer 4.4 External 4.4 Grounding 4.4 MOB 4.6 Off Track 4.4 Setting 4.1 ALARMS Key 1.10 Anchor Alarm 4.4 Arrival Alarm 3.31 Autopilot Pop Up 5.7 Autopilot Pop-Up 5.4...
  • Page 162 Readout 5.4 Reference 5.4 Cursor Echo 4.1 Chart 4.7 Local 4.7 Radar 4.7 SeaTalk 4.7 Custom Options Chartplotter 1.6 2.11 Customizing the Chart Display 5.11 the Screen Presentation Options 2.10 Data Box 2.10 COG 5.4 Cursor 2.10 Date 5.4 Depth 5.4 Group of Six 2.10 On/Off 2.11 Heading 5.4...
  • Page 163 Editing a Route 3.18 3.27 Using the ST60/80 Navigator Keypad 3.17 Waypoint Details 3.8 3.13 Conformance 1.vi 6.16 Servicing and Safety Guidelines 7.1 ENTER Key 1.10 Erasing a Route 3.18 3.26 a Waypoint 3.8 3.14 External Alarms 4.4 Factory Reset 7.2 Features Chartplotter 1.5 Display 1.3...
  • Page 164 Mounting the Display Unit 6.10 Console Mounting 6.10 Moving a Data Box 1.9 2.11 a Waypoint 3.8 3.14 3.18 the Cursor 1.9 MULTI Key 1.10 Naming a Route 3.18 3.22 3.26 a Track 3.39 a Waypoint 3.8 3.13 3.17 Using the ST60/80 Navigator Keypad 3.17 Nav Data Window Options 1.4 Navigation Aid 1.iii...
  • Page 165 Route Leg 3.18 Data Display 3.24 Routine Checks 7.1 Ruler Data Box 4.2 Safety 1.iii EMC Guidelines 6.2 Navigation Aid 1.iii Saving a Route 3.18 a Track 3.39 Scale Chart 2.12 2.13 Scenarios Make & Follow a Route 2.20 Place & Goto a Waypoint 2.18 Review Your Passage Plan 2.22 SeaTalk 1.4 Cable 6.9...
  • Page 166 Variation Source 5.5 Vectors 5.11 5.13 VMG Data Box 5.4 VRM/EBL Key 1.10 Warranty 1.v Waypoint 5.11 5.13 Adding to a Route 3.18 3.28 Data Box 5.4 Data Display 3.8 3.12 3.25 Database List 3.8 3.13 Editing 3.8 Editing Details 3.13 Erasing 3.8 3.14 Goto 3.29...

  • Page 167: Limited Warranty

    In cases where a Raymarine certified installer has not installed the product; i.e. Limited Warranty, the affected unit must be returned to the local Raymarine approved service agent, with a copy of proof of purchase and/or completed warranty card. Subject to the Limitations below, the unit will be repaired/replaced at no fur- ther cost to the user and promptly returned to the user.
  • Page 168 Travel cost allowance on certain products with a suggested retail price below $2500.00 is not authorized. When/or if repairs are necessary, these products must be forwarded to a Raymarine facility or an authorized dealer at owner’s expense and then will be returned via surface carrier at no cost to the owner.
  • Page 169 Factory Service Centers United States of America Raymarine Inc 22 Cotton Road,Unit D Nashua, NH 03063-4219, USA Telephone: +1 603 881 5200 Fax: +1 603 864 4756 www.raymarine.com Sales & Order Services Telephone: +1 800 539 5539 Ext. 2333 or 1 603 881 5200 Ext.

This manual is also suitable for:

631 plusSl520Sl530 plusSl631 plusSl520 plus

Table of Contents