Raymarine 435i Owner's Handbook Manual page 91

Chapter 5: Operation
4. Initiate receiving of waypoints on the NMEA compatible equipment.
5. Select WPT/ROUTE TRANSFER.
The waypoint transfer functions are displayed:
6. Select SEND WAYPOINTS and press ENTER; the text changes to
7. To stop waypoint transfer, press ENTER.
➤
To receive waypoints and route lists:
1. Display the Waypoint List as previously described, then select WPT/
2. Select RECEIVE WAYPOINTS and press ENTER; the text changes to
3. Initiate sending waypoints on the NMEA compatible equipment.
4. To stop waypoint transfer, press ENTER.
Note: If either the Waypoint List or Route List becomes full, a warning is
displayed and the operation is terminated.
STOP SENDING.
ROUTE TRANSFER.
STOP RECEIVING and remains selected.
81
D4692-1
D4693-1