Transferring Waypoints And Routes; Displayed Waypoints; Managing Database Lists - Raymarine 435i Owner's Handbook Manual

80

5.6 Transferring Waypoints and Routes

There are two methods of transferring waypoints and routes. The first is
via the NMEA interface and the seconds is via the Gold Chart card. The
transferring to and from the Gold Chart card is described in the Using
Archives section on page 86.

Displayed Waypoints

Waypoints and routes can be received and transmitted via NMEA. The
NMEA link could be to a PC, typically via a spare RS232 COM port.

Managing Database Lists

The SEND WAYPOINTS function sends all waypoints in the Waypoint List
and all routes in the Route List. Sending the Waypoint List does not affect
current routes.
Note: Sending the Waypoint List includes waypoints in an unsaved route.
The RECEIVE WAYPOINTS function adds waypoints and routes received
via NMEA to the Waypoint List and Route List.
Note: Where multiple waypoints have the same position, the last way-
point sent is the only one included in the Waypoint List.
➤
To send waypoints (and route lists):
1. In chart mode, press ENTER; the primary function bar is displayed:
2. Using trackpad left/right, select WAYPOINTS.
3. Select WAYPOINT LIST.
The Waypoint List is displayed, with its associated function bar:
RC435 and RC435i Chartplotters
D6233-1
D6236-1