Conventions Used - Raymarine 435i Owner's Handbook Manual

Raymarine raychart 435i chartplotter: user guide
Table of Contents

Advertisement

About this Handbook
Introduction
This handbook describes the RC435 Chartplotter with external GPS
antenna and RC435i Chartplotter with internal GPS antenna. The RC435
and RC435i utilize Satellite Differential (SD) signals for enhanced
navigational accuracy.
The RC435 and RC435i GPS Chartplotters are waterproof and therefore
can be installed above deck. The equipment is comprised of:
The RC435/435i Chartplotters can output GPS and Waypoint data to
operate with other equipment, such as an autopilot or repeater instrument
connected via the NMEA 0183 interface. You can also download
waypoints and routes to the RC435/435i from an external source.
Note: This handbook contains important information about installing,
using and maintaining your new Raymarine product. To get the best from
the product, please read this handbook thoroughly.

Conventions Used

Throughout this handbook, dedicated buttons are referred to in bold
capitals (for example, ENTER). Functions, modes of operation and
options are shown in normal capitals (for example, LIGHT).
Operating procedures, which may consist of a single key-press, or a
sequence of numbered steps, are indicated by a ➤ symbol in the margin.
When textual data is displayed on screen, any unavailable data is shown
as dashes, one per character.
Where procedures refer to Select, this implies using the trackpad to
highlight a function and then pressing the ENTER key.
6 in Color LCD display with Chart holder compartment for a Navion-
ics
Gold Chart electronic chart card
®
Low profile external GPS antenna for the RC435
Internal GPS antenna for the RC435i
iii

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

435Rc435Rc435i

Table of Contents