Controlling The Display; Selecting The Display Mode - Raymarine Raychart 425 Owner's Handbook Manual

2-4
sired mode on power-up. Simulated data should never be used for nav-
igational purposes.
➤
To view a chart image using simulated data:
1. Press the PAGE key to display the SET UP function bar (Figure 2-2):
2. Press trackpad left/right to highlight SYSTEM SET UP and press ENTER
to display the System Set Up menu.
3. Use trackpad up/down to highlight the SIMULATOR option.
4. Use trackpad left/right to select ON .
5. If necessary, use trackpad up/down to highlight, in turn, the SIMU-
LATED SOG and COG options and trackpad left/right to set as required.
These set Speed in 1Kt intervals and Course in 1° intervals, respec-
tively.
6. Press CLEAR twice to return to the chart screen.
7. A flashing SIM indicator appears in inverse video in the status bar at
the top of the chart screen.

2.4 Controlling the Display

This section describes how to:
• Change the display mode.
• Move around the chart by panning the display, changing the chart cen-
tre and changing the chart scale.

Selecting the Display Mode

Use the PAGE key to select the display mode. Select the following modes
by repeat presses of the PAGE key as listed below and shown in
Figure 2-3:
• Set Up functions (see Chapter 4)
• Course Deviation Indicator (CDI)
• Bearing & Distance Indication (BDI)
• Waypoint data
• Navigation data
• Time/Date data
• Return to Set Up functions
Note: Press GOTO to return to normal Chart display at any time.
Figure 2-2: Set Up Function Bar
Raychart 425 Chartplotter
D4694_1