Creating A New Route - Raymarine 435i Owner's Handbook Manual

56
•
•
Note: The system is limited to 500 unique waypoints yet 20 routes of 50
waypoints as stated above are permissible. This figure is achieved by us-
ing waypoints in more than one route.
➤
To access the route function bar:
1. Press ENTER to display the primary function bar.
2. Select ROUTES to display the first level functions.
3. Select MORE to see more functions.
4. Select MORE again to return to the first level functions.
5. Press CLEAR twice to return to chart mode.

Creating a New Route

Note: If there is a current route on screen, it is cleared when MAKE
ROUTE is selected. Ensure that this route is saved before continuing. If
following the current route you must STOP FOLLOW (see page 72) before
a new route can be created.
Waypoints in a route can be added/removed after it has been created,
either via the ROUTES function or via the cursor (see Editing a Route in the
following sections).
Use the database list to erase and name existing routes
Edit a route by adding, removing and moving waypoints
RC435 and RC435i Chartplotters
D6233-1
D4677-1
D4678-1