Table of Contents
Advertisement
If input voltage over 600V, will damage the meter.
➢ mA current fuse range: 250V 1A
if the current over the rated range ,fuse will melt to protect the meter .Pls use the same model when
change the fuse, Pls opens the battery cover to change.
Note: 10A socket without fuse protection, if over the current range
Wrong using the 10A socket to measure the voltage, will damage the meter.
3.3.30 Optical power meter (* Optional)
Click icon
to enter, with five wavelength 1625nm,1550nm, 1490nm, 1310nm,1300nm, 850nm,
linear or nonlinear optical power display, both for optical power testing and Fiber link loss relative
measurement. It is necessary tool for installation and maintenance optical fiber communication, cable
television and CCTV security system.
Note: Please keep the fiber connector and the dust cap be clean, and clean the detector with the special
alcohol.
Data hold
While testing, click "Hold" to data hold, the data will not change. It's convenient to read. Press
again to quit.
Page.85.
Advertisement
Table of Contents
