Table of Contents
Advertisement
1) SYMBOLS:
U: DC Voltage Measuring
Ω: Resistance Measuring
~
U
: AC Voltage Measuring
: Continuity Testing
AC/DC
Voltage and current measurement state display
Auto- range
The Multimeter auto adjust the range by input signal or tested components
Data hold
Hold data
Relative
Display the relative measurement value
measurement
Press the key to change display state
10A socket
In 10A current measurement state ,indicate use 10A socket
The current measurement value over the range, if in the Auto range state, to
Over range
switch Auto.
2) OPERATING INSTRUCTION
A.
DC Voltage Measuring
WARNING!
You can't input the voltage which more than 660V DC, it's possible to show higher voltage, but it's
may destroy the inner circuit.
Pay attention not to get an electric shock when measuring high voltage.
a. Connect the black test lead to the "COM" jack and the red test lead to the "V/Ω" jack.
U
b. Select
, enter the DC voltage measurement.
c. the tester default Auto range status ,by click "DC auto range" , press the
key can select manual range and restore auto range .
A: DC Current Measuring
: Diode Testing
~
A
: AC Current Measuring
: Capacitance Measuring
Page.78.
Advertisement
Table of Contents
