Analog Camera Connection; Hd Coaxial Camera Connection - Delta CS-H9-70HG User Manual

3.2.2 Analog camera connection

1) Connect the camera's video output to the IP tester's VIDEO IN. The image will display on the tester
after pushing the PTZ icon.
2) CCTV IP Tester "VIDEO OUT" interface connect to the Video input of monitor and optical video
transmitter and receiver, the image display on the tester and monitor.
3) Connect the camera or the speed dome RS485 controller cable to the tester RS485 interface.(Note:
positive and negative connection of the cable)

3.2.3 HD Coaxial camera connection

* SDI, CVI, TVI, AHD camera are classified as HD coaxial cameras. Hereby the following instruction
of how to connect SDI camera to the tester is also applied to CVI, TVI, and AHD camera.
Page.10.