Table of Contents
Advertisement
Stream code: When test camera via RTSP, you can select mainstream or sub stream to test (if camera's
RTSP have not been start or without, it will tip "auto match fail, please switch to manually selecting".
IP Camera's IP: Enter the IP camera's IP address manually or click "Search" to auto-scan for the IP
camera's IP address. It is better to directly connect the IP camera to the tester so the search results will
only display the camera's IP address. If the tester is connected to a PoE switch, it will find and display
several IP address.
Page.33.
Advertisement
Table of Contents
