Table of Contents
Advertisement
Meter-end/cable tester-end fault location:
Tester-end/cable tester-end display "x", it means the RJ45 cable connector or
within 1 meter from the RJ45 cable connector is faulty.
The middle part of sequence display "x", it means the RJ45 cable connector
at the end of Tester/Cable tester is normal, and there is a breakpoint 1 meter
away from the RJ45 cable connector.
The middle part of sequence is not communicated and not display "x", it
means the RJ45 cable connector at the end of Tester / Cable tester is faulty,
and the middle of the cable is normal.
Tester-end can perform RJ45 cable connector fault detection even when the
remote end is not connected to the cable tester's UTP interface.
7.2 Digital cable tracer (Optional)
Press key button, to enter "Cable Tester" and select "Cable tracer" app.
Connect UTP cable or telephone cable to tester bottom port "UTP/SCAN",
21
Advertisement
Table of Contents
