Cable Tracer - Delta CS-H9-70HG User Manual

3.3.24 Cable Tracer

Connect tested cable or BNC cable to the UTP port or the CABLE SCAN (VIDEO OUT) port on the
bottom. Click icon to enter, click the Number on the screen to adjust audio type.
UTP mode is used for searching the normal network cable or other cables. STP mode is used for
searching the shielded network cable.
Rotating the switch of cable tracer to turn on. Clockwise rotation increases sensitivity, anticlockwise
rotation reduce sensitivity.
Cable tracer and Cable tester can be tested at the same time. It is better to judge whether the search
network cable is accurate. Connect the other end of the tested network cable to the "UTP" port of cable
tracer, the cable sequence, continuity, test box number and network cable type will be displayed on the
right side of the meter interface. The "G" indicates the continuity of the shielded network cable.
The 1-8 indicators of cable tracer will flash according to the cable sequence. The DIRECT / CROSS /
OTHER three indicator lights display the type of network cable directly.
Press the "MUTE" button of cable tracer for 2 seconds. After the "Di" sound, the silent mode is turned
on. In the silent mode, can judge cable type according to the indicator light. Press the "MUTE" button
again to exit the silent mode.
Application
It's convenient for people to find out the other end of the cable from the messy cables in security
Page.70.