Table of Contents
Advertisement
Application:
Add an IP camera or other network device to the current network group, the new IP address must not be
occupied, otherwise it will cause IP conflicts and stop the equipment normal working. Link monitor can
check if the new setting IP address is occupied.
3.3.20 PoE power / DC12V 3A and DC 5V 2A USB power output
When the tester is turned on, the DC 12V and DC 5V power output functions are automatically turned
on. If the IP tester is turned off, the DC 5V USB can still be used to power an external USB device.
To use the PoE Power Output function, click on the icon
and change the switch "ON" or "OFF".
The IP camera needs to be connected to the LAN port before you turn PoE Power on. If the IP camera
Supports PoE, the PoE power is delivered via pins 1, 2, 3, and 6 ； 4, 5, 7 and 8 on the LAN port. The IP
tester will
Display "48V ON" at the top of the screen when the POE power is still on.
Page.64.
Advertisement
Table of Contents
