Table of Contents
Advertisement
Or use tester as a Server, computer as test Client（select Client, input tester's IP address to test）
When use tester as Server, shows results:
（4）Port Flashing
Connect a network cable to the meter's "LAN" port, click the icon
to open the Port Flashing app.
Click "Start". The IP tester sends a unique signal to make the connected LAN port of the switch flash.
If the tester and PoE switch are connected well, the LAN port of POE switch flash at special frequency,
If not, no any changes on the LAN port
Page.61.
Advertisement
Table of Contents
