Delta CS-H9-70HG User Manual page 43

A. Protocol
Use the up and down arrow keys to move the yellow cursor to the "protocol", set corresponding
Protocol and support more than thirty PTZ protocols. Such as Pelco-D, Samsung, Yaan, LiLin, CSR600,
Panasonic, Sony-EVI etc.
B. Port
Click and move to "port" Select the communication port for the PTZ camera controlling (RS485)
C. Baud
Move the yellow cursor to "Baud ", Select the baud rate according to baud rate of the PTZ
camera.(150/300/600/1200/2400/4800/9600/19200/57600/115200)
D. Address
Set the ID according the ID of PTZ camera (0~254), the setting address data must be consistent the
speed dome address.
E. Pan speed: Set the pan speed of PTZ camera (0~63)
F. Tilt speed: Set the tilt speed of PTZ camera (0~63)
G. Set preset position (Set PS)
Click and select "Set PS", set and save preset position number(1~128).
H. Call the preset position (Go PS)
Click and select "Set PS", set and save preset position number (1~128), click "sure" to save,
Call some special preset number, can call the dome camera menu
Page.38.