Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Delta MS-ACT50-4K
Summary of Contents for Delta MS-ACT50-4K
- Page 1 HD CCTV tester User Manual...
- Page 2 Thank you for purchasing the HD CCTV tester. Please read the manual before using the HD CCTV tester and use properly. For using the HD CCTV tester safely, please first read the「Safety Information」carefully in the manual. The manual should be kept well in case of reference.
- Page 3 Keep the S/N label for after-sale service within warranty period. Product without S/N label will be charged for repair service. If there is any question or problem while using the HD CCTV tester, or damages occurred on the product, please contact our technical department.
-
Page 4: Table Of Contents
Content 1. Safety information ..................1 2. Function interface ................... 2 3. Operation......................8 3.1 Installing the Battery ................ 8 3.2 General ..................... 8 4. Feature ......................9 5. Feature introduction ..................11 5.1 TVI/CVI/AHD/CVBS camera test ..........11 5.2 Coaxial PTZ control ................ 12 5.3 RS485 control ................. - Page 5 6.2 VGA input ..................17 7. Cable Tester ....................18 7.1 UTP Cable Tester................18 7.2 Digital cable tracer (Optional)............21 8. U disk reading ....................23 9. Audio test ..................... 24 10. Setting ......................24 11. Packing kits ....................25 12.
-
Page 6: Safety Information
1. Safety information ◆ The tester is intended to use in compliance with the local rules of the electrical usage and avoid to apply at the places which are inapplicable for the use of electrics such as hospital, gas station etc. ◆... -
Page 7: Function Interface
◆ The tester should not be used in the environment with the flammable gas. ◆ Do not disassemble the instrument since no component inside can be repaired by the user. If the disassembly is necessary indeed, please contact with the technician of our company. ◆... - Page 8 ○ , 1RS485 data transmission indicator: the light is red while the data is being transmitted ○ , 2Charging indicator: the light is red while the battery is being charged. The light will automatically turn off if charge completed...
- Page 9 ○ , 3Power indicator: the light is green while the tester is turned on ○ , 4Zoom in the image ○ , 5Zoom out the image ○ , 6Focus the image faraway ○ , 7Focus the image nearby ○ , 8Upward, select function, set parameter and tilt the PTZ upward ○...
- Page 10 downward ○ , 1 2Leftward, select function, set parameter and pan the PTZ leftward ○ , 1 3Setting button, enter the function parameter settings ○ , 1 4Return/Close: Return and cancel the operation...
- Page 11 ○ , 1 5CVBS/AHD/TVI/CVI input (BNC interface) ○ , 1 6EX/HD-SDI input (BNC interface) （Optional） ○ , 1 7HDMI input ○ , 1 8DC 5V 1A power output, USB power bank ○ , 1 9 DC 12V 1A power output, temperately supply power for camera ○...
- Page 12 ○ , 2 3 DC 5V 2A charging interface ○ , 2 4RS485 Interface: RS485 communication for the PTZ ○ ,25 Audio input ○ ,26UTP port, UTP cable tester port/ Cable tracer port (*Optional) ○ ,27 VGA input...
-
Page 13: Operation
3. Operation 3.1 Installing the Battery The tester has built-in lithium ion rechargeable battery. The battery inside battery cabin should be disconnected for safety during transportation! Prior to the use of the instrument, please take out the battery insulation paper. Sliding the ON/OFF power switch can power on or off the tester. -
Page 14: Feature
VGA input, Audio input, PTZ control, PING test, LED Flashlight, DC 12V 1A power output, etc. Its portability, user-friendly design and many other functions make the CCTV tester an essential tool for all installers or technicians. 4. Feature ● 5 inch TFT-LCD screen, 800*480 resolutions ●... - Page 15 ● HD-SDI test, 1920 x 1080P 25/30/50/60 FPS, coaxial PTZ & call OSD menu (*Optional) ● 3G-SDI test, 1920 x 1080P 50/60 FPS, coaxial PTZ & call OSD menu (*Optional) ● CVBS camera test, PTZ controller ● DC12V/1A power output, camera can be powered from DC 12 Voltage. ●...
-
Page 16: Feature Introduction
● 3.7 V /5200mAh Li-ion Battery, after 4 hours charging, working time lasts 6.5 hours 5. Feature introduction 5.1 TVI/CVI/AHD/CVBS camera test Connect camera to “AHD/CVI/TVI” port, enter “Auto HD” app. Can auto recognize AHD/CVI/TVI/CVBS signal and display the image, as well as display the camera type and frame. -
Page 17: Coaxial Ptz Control
5.2 Coaxial PTZ control When enter “PTZ” option, press key switch to “menu setting”, and switch to“key (open)” or “OK” option, press key to call out the camera main menu. -
Page 19: Rs485 Control
5.3 RS485 control Support RS485 control, baud 600-115200bps, compatible with more than 30 protocols such as PELCO-D/P, Samsung, Panasonic, Lilin, Yaan, etc. Can set PTZ pan speed and Tilt speed, call set preset position. In the Auto... - Page 20 HD/CVBS IN interface, press “SET” , can set RS485 protocol, Port, Baud, Address, PTZ, etc.
-
Page 21: Ex-Sdi/Hd-Sdi Camera Test
5.4 EX-SDI/HD-SDI camera test Connect camera to “SDI” port, enter “Auto HD” app, and select “SDI” to enter SDI interface, can display the camera image, and will display the resolution and frame rate in top-left corner, support up to 4K/8MP 3840x2160p 25/30fps EX-SDI camera test, coaxial PTZ, call OSD menu and RS485 control. -
Page 22: Vga Input
6.2 VGA input... -
Page 23: Cable Tester
Connect one end of VGA cable to Tester’s “VGA” port, other end connect to XVR’s “VGA” port, enter “VGA input” app, can receive the real-time video signal from XVR, support up to 1920x1200 resolution. 7. Cable Tester 7.1 UTP Cable Tester... - Page 24 Connect one end of LAN cable or telephone cable to Tester’s UTP/SCAN port, other end connect to the UTP port of Cable tester or cable tracer (*optional). Cable tester can test cable sequence, continuity and cable type, can detect near / medium / far end fault of RJ45 cable connector, display the number of the remote kit (Remote default No.255).
- Page 25 Visual judgment of network cable availability: All sequence of cable is correct, generally corresponds to Gigabit straight/cross network cables. Cable sequence is wrong, but the cable is still available, generally corresponds to 100M straight-through/cross network cable. All sequence of cable is wrong, not available.
-
Page 26: Digital Cable Tracer (Optional)
Meter-end/cable tester-end fault location: Tester-end/cable tester-end display “x”, it means the RJ45 cable connector or within 1 meter from the RJ45 cable connector is faulty. The middle part of sequence display “x”, it means the RJ45 cable connector at the end of Tester/Cable tester is normal, and there is a breakpoint 1 meter away from the RJ45 cable connector. - Page 27 or use adapters and cables to connect other cables, such as BNC cable. Or use BNC adapters and alligator clamp cable to connect BNC cable etc. Note: If use BNC adapters and alligator clip cable to connect BNC cable etc. Please select to “BNC mode”, if connect shielded cable, please select “STP mode”.
-
Page 28: U Disk Reading
Locate cables: Arrow keys to switch mode, “UTP mode” to looking for unshielded network or telephone cables, “BNC mode” for finding BNC cable after connecting adapter. “STP mode” is used to find the shielded network cable. Turn on the cable tracer. The round knob, if clockwise rotation the knob to increase sensitivity, and turn it counter clockwise to decrease the sensitivity. -
Page 29: Audio Test
image, music, video and documents. And also support DC 5V 1A power output, as power bank. 9. Audio test Connect pickups or other Audio equipment to tester’s bottom port “Audio in”, you can test the audio input from audio pickup devices by connecting the audio pickup device to the CCTV tester with the supplied audio cable. -
Page 30: Packing Kits
Language: Select your desired language: English, Korean, Russian, Italian, Polish, Spanish, French, Japanese, Deutsch,Turkish, Portuguese, Czech, Serbian,etc. Brightness/Contrast/Color: Set the image brightness of Auto HD, CVBS, VGA and HDMI input Backlight: Set the desired brightness of the cctv tester Volume: Set volume level PTZ address scan: You can toggle the PTZ Address scan off or on before entering the “... -
Page 31: Specifications
2) Network cable tester 3) Adaptor DC5V 2A 4) RJ45-BNC converter (Only for cable tracer) 5) Li-ion battery (3.7V DC 5200mAh) 6) Tool bag /DC Power cable/BNC cable/RS485 cable/Audio cable 7) Safety cord/Wrist belt 8) Manual 12. Specifications Model HD CCTV tester New 5 inch TFT-LCD screen, 800*480 Display resolution... - Page 32 FPS, UTC control / call OSD menu 8MP TVI camera test, 3840 x 2160P 12.5/15 TVI video signal test FPS, UTC control/ call OSD menu 8MP AHD camera test, 3840 x 2160P 15FPS, AHD video signal UTC control / call OSD menu test 8MP EX-SDI, HD-SDI, 3G-SDI, UTC control / SDI video signal...
- Page 33 /1920×1080P/1400×1050P/1600x 1200P /1600x 900P/1440x900P/1360x768P/1280x1024/1280x 960/1280x800/1280x768, etc 1 channel BNC input, NTSC/PAL (Auto adapt), PTZ control, RS485 control, Baud 600- CVBS video signal 115200bps, compatible with more than 30 test protocols such as PELCO-D/P, Samsung, Panasonic etc Search BNC cable, network cable and telephone Digital Cable tracer (* cable from the mess cables.
- Page 34 1 channel audio signal input, test the audio Audio test whether is normal Power Built-in 3.7V Li-ion battery, 5200mAh Battery After charging 4 hours, normal working time 6.5 hours. The maximum charging current of the Rechargeable battery is 1.67A, and 5V 2A charger is standard. Parameters OSD menu, select your desired language: English, Korean, Russian, Italian, French,...
- Page 35 Dimension/Weight 184mm x 110mm x 41mm / 0.4Kg Comparison Table: Note: Digital cable tracer is optional function and not including, if added, need pay extra cost. 5 inch tester + 5 inch tester Analog+TVI CVI +Analog+ TVI CVI AHD+VGA input + AHD+SDI/EX HDMI input SDI+VGA input +...
- Page 36 √ √ VGA IN Digital Cable tracer* Optional Optional Upgrade UTP cable test, check fault of RJ45 cable connector √ √ The data above is only for reference and any change of them will not be informed in advance. For more detailed technical inquiries, please feel free to contact our technical department.
Need help?
Do you have a question about the MS-ACT50-4K and is the answer not in the manual?
Questions and answers