Table of Contents
Advertisement
child restraint system or top strap instal-
lation and the head restraint can be
removed, remove the head restraint.
(P.120)
2
Open the anchor fitting cover,
latch the attaching clip onto the
anchor fitting and tighten the
upper anchorage strap.
Make sure the upper anchorage strap
is securely latched. (P.49)
When installing the child restraint sys-
tem with the head restraint being
raised, be sure to have the top strap
pass underneath the head restraint.
Attaching clip
Upper anchorage strap
WARNING
■
When installing a child restraint
system
Observe the following precautions.
Failure to do so may result in death or
serious injury.
●
Firmly attach the upper anchorage
strap and make sure that the belt is
not twisted.
●
Do not attach the upper anchorage
strap to anything other than the
anchor fitting of the seat the child
restraint system is installed to.
●
After securing a child restraint sys-
tem, never adjust the seat.
1-2. Child safety
●
Follow all installation instructions
provided by the child restraint sys-
tem manufacturer.
●
When installing the child restraint
system with the head restraint
being raised, after the head
restraint has been raised and then
the anchor fitting has been fixed, do
not lower the head restraint.
■
Using child restraint anchorages
WARNING: child restraint anchorages
are designed to withstand only those
loads imposed by correctly fitted child
restraints. Under no circumstances
are they to be used for adult
seatbelts, harnesses, or for attaching
other items or equipment to the vehi-
cle.
NOTICE
■
Child restraint anchor fitting
When not in use, make certain to
close the lid. If it remains open, the lid
may be damaged.
51
1
Advertisement
Table of Contents
