Table of Contents
Advertisement
mal. Note that normal driving is still
possible even when Multi-terrain
Select brake control is not operating.
*
: After stopping the vehicle, do not stop
the engine until the display message
has turned off.
■
When Mud & Sand or Rock & Dirt
mode is canceled
In the following situations, Mud & Sand
mode or Rock & Dirt mode are automat-
ically canceled even if they are selected.
●
When the driving mode is changed
(P.255)
●
When the engine switch is turned off
■
Driving in Mud & Sand or Rock &
Dirt mode
The following types of situations may
occur, but they are not malfunctions.
●
Vibrations may be felt throughout the
vehicle or steering wheel
●
Operating noise may be heard from
the engine compartment
■
When an inspection at your Toyota
dealer is necessary
In the following situations, the system
may be malfunctioning. Have the vehicle
inspected by your Toyota dealer immedi-
ately.
●
When the slip indicator light illumi-
nates while Mud & Sand or Rock &
Dirt mode is selected
●
When the indicator for each mode
does not illuminate even though Mud
& Sand or Rock & Dirt mode is
selected
4-5. Using the driving support systems
Snow mode switch
Snow mode can be selected to
suit the conditions when driv-
ing on slippery road surfaces,
such as on snow.
System operation
Press the snow mode switch.
When the switch is pressed, the system
switches to snow mode and the snow
mode indicator illuminates on the
multi-information display.
When the switch is pressed again, the
snow mode indicator turns off.
■
When changing to snow mode
The background of the multi-information
display changes.
■
Canceling the snow mode
Snow mode is automatically canceled
when the engine switch is turned OFF or
Mud & Sand or Rock & Dirt mode is
selected for Multi-terrain Select (AWD
models only).
259
4
Advertisement
Table of Contents
