Dynamic Radar Cruise Control With Full-Speed Range - Toyota KLUGER 2021 Owner's Manual

204
4-5. Using the driving support systems
Dynamic radar cruise
control with full-speed
range
In vehicle-to-vehicle distance
control mode, the vehicle auto-
matically accelerates, deceler-
ates and stops to match the
speed changes of the preced-
ing vehicle even if the acceler-
ator pedal is not depressed. In
constant speed control mode,
the vehicle runs at a fixed
speed.
Use the dynamic radar cruise
control with full-speed range
on freeways and highways.
 Vehicle-to-vehicle distance
control mode (P.206)
 Constant speed control mode
(P.212)
System Components
■
Meter display
Multi-information display
Set speed
Indicators
■
Operation switches
Vehicle-to-vehicle distance
switch
"+RES" switch
Cruise control main switch
Cancel switch
"-SET" switch
WARNING
■
Before using dynamic radar
cruise control with full-speed
range
●
Driving safely is the sole responsi-
bility of the driver. Do not rely solely
on the system, and drive safely by
always paying careful attention to
your surroundings.
●
The dynamic radar cruise control
with full-speed range provides driv-
ing assistance to reduce the
driver's burden. However, there are
limitations to the assistance pro-
vided.
Read the following conditions care-
fully. Do not overly rely on this sys-
tem and always drive carefully.
• When the sensor may not be cor-
rectly detecting the vehicle ahead:

P.215
• Conditions under which the vehi-
cle-to-vehicle distance control
mode may not function correctly:

P.215