334
6-3. Do-it-yourself maintenance
WARNING
●
Do not expose batteries to
extremely low pressure due to high
altitude or extremely high tempera-
tures.
●
Do not burn, break or cut a battery.
NOTICE
■
For normal operation after
replacing the battery
Observe the following precautions to
prevent accidents:
●
Always work with dry hands.
Moisture may cause the battery to
rust.
●
Do not touch or move any other
component inside the remote con-
trol.
●
Do not bend either of the battery
terminals.
Checking and replacing
fuses
If any of the electrical compo-
nents do not operate, a fuse
may have blown. If this hap-
pens, check and replace the
fuses as necessary.
Checking and replacing
fuses
1
Turn the engine switch off.
2
Open the fuse box cover.
Engine compartment: type A
fuse box (if equipped)
Push the tab in and lift the lid off.
Engine compartment: type B
fuse box
Push the tab in and lift the lid off.