Table of Contents
Advertisement
4
Turn the bulb base
counterclockwise and remove it.
5
Remove the light bulb.
6
Install a new light bulb, and then
install the bulb base to the light
unit by inserting it and turning it
clockwise.
After installing the bulb base, wiggle it
lightly to make sure it is securely
installed and turn on the turn signal
lights to visually check that there is no
light leaking from between the bulb
6-3. Do-it-yourself maintenance
base and light unit.
7
Install the light unit.
Align the 2 guides and push the light
unit toward the front of the vehicle to
install it.
8
Install the 2 screws.
339
6
Advertisement
Table of Contents
