Table of Contents
Advertisement
98
3-2. Opening, closing and locking the doors
WARNING
●
Do not pull on the back door
damper stay (vehicles without a
power back door) (P.99) or back
door spindle (vehicles with a power
back door) (P.105) to close the
back door, and do not hang on the
back door damper stay (vehicles
without a power back door) or back
door spindle (vehicles with a power
back door).
Doing so may cause hands to be
caught or the back door damper stay
(vehicles without a power back door)
or back door spindle (vehicles with a
power back door) to break, causing
an accident.
●
If a heavy object is attached to the
back door, it may suddenly shut
again after being opened, causing
someone's hands, arms, head or
neck to be caught and injured. Do
not attach any accessories other
than genuine Toyota parts to the
back door.
Unlocking and locking the
back door from the outside
■
Smart entry & start system
Carry the electronic key to enable
this function.
1
Unlocks all the doors
The doors cannot be unlocked for 3
seconds after the doors are locked.
2
Locks all the doors
Check that the door is securely locked.
■
Wireless remote control
P.93
■
Operation signals
P.94
Unlocking and locking the
back door from the inside
■
Door lock switches
P.95
Opening/closing the back
door (vehicles without a
power back door)
■
Opening the back door
Raise the back door while pushing
up the back door opener switch.
■
Closing the back door
Lower the back door using a back
door handle, and then push the
back door from the outside to close
it.
Be careful not to pull the back door
sideways when using a handle.
Advertisement
Table of Contents
