Table of Contents
Advertisement
48
1-2. Child safety
1
If installing the child restraint
system to the front passenger
seat is unavoidable, refer to
P.39for the front passenger seat
adjustment.
2
When using the second seat,
adjust the seatback to the 3rd
lock position from the most
upright position.
3
If the head restraint interferes
with your child restraint system,
and the head restraint can be
removed, remove the head
restraint. Otherwise, put the
head restraint in the upper most
position. (P.120)
When using the third seat, return the
head restraints to using position
(upright). (P.117)
4
Run the seat belt through the
child restraint system and insert
the plate into the buckle. Make
sure that the belt is not twisted.
Securely fix the seat belt to the
child restraint system in accord-
ance to the directions enclosed
with the child restraint system.
5
If your child restraint system is
not equipped with a lock-off (a
seat belt locking feature),
secure the child restraint system
using a locking clip.
6
After installing the child restraint
system, rock it back and forth to
ensure that it is installed
securely. (P.49)
■
Removing a child restraint
system installed with a seat
belt
Press the buckle release button
and fully retract the seat belt.
When releasing the buckle, the child
restraint system may spring up due to
the rebound of the seat cushion.
Release the buckle while holding down
the child restraint system.
Since the seat belt automatically reels
itself, slowly return it to the stowing
position.
■
When installing a child restraint
system
You may need a locking clip to install the
child restraint system. Follow the
instructions provided by the manufac-
turer of the system. If your child restraint
system does not provide a locking clip,
you can purchase the following item
from your Toyota dealer: Locking clip for
child restraint system
(Part No. 73119-22010)
Advertisement
Table of Contents
