Table of Contents
Advertisement
44
1-2. Child safety
Suitable for "universal" category
child restraint system fixed with
the seat belt.
Suitable for i-Size and ISOFIX
child restraint system.
Includes a top tether anchorage
point.
Never use a rear-facing child
restraint system on the front
passenger seat.
*1
: Move the front seat fully rearward. If
the passenger seat height can be
adjusted, move it to the upper most
position.
*2
: Adjust the seatback angle to the
most upright position. When install-
ing a forward-facing child seat, if
there is a gap between the child seat
and the seatback, adjust the
seatback angle until good contact is
achieved.
■
Detail information for child restraint systems installation
Seat position number
Seating position suita-
ble for universal belted
(Yes/No)
i-Size seating position
(Yes/No)
Seating position suita-
ble for lateral fixture
(L1/L2/No)
*3
: If the head restraint interferes with
your child restraint system, and the
head restraint can be removed,
remove the head restraint.
Otherwise, put the head restraint in
the upper most position.
*4
: Use only a front-facing child restraint
system.
*5
: When child restraint system is
installed, adjust the seatback to the
3rd lock position from the most
upright position.
*6
: When child restraint system is
installed, return the head restraints
to using position (upright).
Seating position
*1
Yes
For-
Yes
ward-fac-
ing only
No
Yes
No
No
*1
*1
Yes
Yes
Yes
No
Yes
No
No
No
No
*2
*2
Yes
No
No
Advertisement
Table of Contents
