Table of Contents
Advertisement
372
7-2. Steps to take in an emergency
3
Pass the hoist assembly
holding bracket
wheel opening.
4
Fully depress the secondary
latch
and install the bracket
to the hoist assembly
5
and
through the
6
.
7
Lay the tire on the ground with
the outer surface (valve stem)
facing up.
Before raising the tire, make
sure that the hoist assembly is
perpendicular to the wheel
opening. (Try to place the tire
directly beneath the vehicle,
near where the wire cable is
hanging from.)
Valve stem
Using the jack handle and
adapter socket, tighten the tire
clamp bolt by turning it clock-
wise until the tire is in the correct
position and two clicks are
heard as the jack handle skips.
Advertisement
Table of Contents
