Toyota KLUGER 2021 Owner's Manual page 373

Table of Contents

Advertisement

come into contact with the disc wheel.
Disc wheel
Washer
3
Lower the vehicle.
4
Firmly tighten each wheel nut
two or three times in the order
shown in the illustration.
Tightening torque:
103 N•m (10.5 kgf•m, 76 ft•lbf)
7-2. Steps to take in an emergency
WARNING
Stowing the flat tire
Failure to follow steps listed under
stowing the tire may result in damage
to the spare tire carrier and loss of the
tire, which could result in serious
injury or death.
Stowing the flat tire, jack
and all tools
1
Remove the center wheel orna-
ment by pushing from the
reverse side.
Be careful not to lose the wheel orna-
ment.
2
Stand the tire against the
bumper with the inner surface
facing toward you and install the
outside spare tire cover.
371
7

Advertisement

Table of Contents
loading

Table of Contents