Table of Contents
Advertisement
3
Press one of the buttons for the
driving position you want to
recall until the buzzer sounds.
■
To stop the position recall opera-
tion part-way through
Perform any of the following operations:
●
Press the "SET" button.
●
Press button "1" or "2".
●
Operate any of the seat adjustment
switches (only cancels seat position
recall).
■
Operating the driving position
memory after turning the engine
switch off
Recorded seat positions can be acti-
vated up to 180 seconds after the
driver's door is opened and another 60
seconds after it is closed again.
■
When the recorded seat position
cannot be recalled
The seat position may not be recalled in
some situations when the seat position
is recorded in a certain range. For
details, contact your Toyota dealer.
Registering/canceling/recall
a driving position to an elec-
tronic key (memory recall
function)
■
Registering procedure
Record your driving position to but-
3-3. Adjusting the seats
ton "1" or "2" before performing the
following:
Carry only the key you want to reg-
ister, and then close the driver's
door.
If 2 or more keys are in the vehicle, the
driving position cannot be recorded
properly.
1
Check that the shift lever is in P.
2
Turn the engine switch to ON.
3
Recall the driving position that
you want to record.
4
While pressing the recalled but-
ton, press and hold the door
lock switch (either lock or
unlock) until the buzzer sounds.
If the button could not be registered, the
buzzer sounds continuously for approx-
imately 3 seconds.
■
Cancelation procedure
Carry only the key you want to can-
cel and then close the driver's door.
If 2 or more keys are in the vehicle, the
driving position cannot be canceled
properly.
1
Turn the engine switch to ON.
2
While pressing the "SET" but-
ton, press and hold the door
lock switch (either lock or
119
3
Advertisement
Table of Contents
