idp SMART Series User Manual page 67

5.5.3. Unclear or not uniform print.

Uneven or bad card surface.
Change the card.

Too high or low setting of the color density.
Please contact the local supplier. The color
density default of your printer needs to be
changed.

The printer head is contaminated with the
dust and dirt.
Clean the printer head with cleaning kit.
5.5.4. Not aligned color print.

Non-standard cards or bad cards.
Change the cards. You can use only ISO CR-80
card (54mm x 86mm).

Uneven or bad card surface.
Change the card.

The transfer roller or printing roller is
contaminated with the dust and dirt.
Clean the rollers with the cleaning kit as section 5.2.
 Worn-out printer.
Please contact the local supplier.
5.5.5. Unplanned color print.
 Non-standard cards or bad cards.
Change the cards. You can use only ISO CR-80
card (54mm x 86mm).

Uneven or bad card surface.
Change the card.

The transfer roller or printing roller is
contaminated with the dust and dirt.
Clean the rollers with the cleaning kit as section 5.2.
 Worn-out printer.
Please contact the local supplier.
Figure 68 Printing quality trouble 3
Figure 69 Printing quality trouble 4
Figure 70 Printing quality trouble 5
53